UHF MSF5000 - Convert to DC Operation?
Moderator: Queue Moderator
UHF MSF5000 - Convert to DC Operation?
M/N TPN1186B AC Power Supply, but want to power with external 13.8V. Is this possible? Any ideas on how this can be converted? I do not require charging cabability.
My two bits worth:
As Will says all you have to do is power the station on the same terminals that the PA is connected to. That is where the factory DC connection would go.
The necessary fuses are on the distribution board on the power supply.
If this is a "digital" station you may want to disable the power cutback when on battery.
Normally, the station will drop 3DB in power when on battery.
As Will says all you have to do is power the station on the same terminals that the PA is connected to. That is where the factory DC connection would go.
The necessary fuses are on the distribution board on the power supply.
If this is a "digital" station you may want to disable the power cutback when on battery.
Normally, the station will drop 3DB in power when on battery.
Aloha, Bernie