Anyone =Motorola part numbers ?????

EKLB · Post by **EKLB** » Sun Apr 25, 2004 8:49 am

Does any one by chance know the part numbers for the following items?

The GP300 front label on the case that says (MOTOROLA Radius GP300)
on it ? = this sticker is on the case in the front upper right corner.

The M number i have and trying on my MOL account is 1380992Z03 but comes back as not found/bad number.

Also the sticker on the Maxtrac front in the lower right corner that says
(Motorola Maxtrac) = I have several trunking B7 fronts id like to change the sticker from Maxtrac 800 to the multi conventional use.

I do have the eschuten front part number for the conv front with the ch up/down arrows/scan/mon/sel/pri markings and it is #1380277L01 for you that want to know.

Im also wanting the part number for the plastic 8 pin mike conector on the end of the mike cord for the maxtrac palm mike that plugs into the radio.

Other GP300 part numbers that come back as no good are.

GP300 mike element = 5013920A03 Anyone have a good part number?

GP300 speaker = 5005589U04 Anyone have a good part number ?

GP300 flex wire for the speaker/mike = 3080560D01 Anyone have a good part number?

GP300 dtmf bd = 0180704Y27 Anyone have a good part number ?

ALSO IF ANYONE HAS GP300 OR P110 RADIOS NON WORKING THAT THEY WOULD LIKE TO SELL AS PARTS = IM INTERESTED / PLEASE EMAIL ME WITH YOUR PRICE AND WHAT YOU HAVE WITH THE MODEL NUMBER OR INFO YOU DO HAVE ON AND ABOUT THE RADIO.

IM INTERESTED IN BOTH UHF AND VHF BANDS.

[email protected]

Thanx EKLB

EKLB · Post by **EKLB** » Mon Apr 26, 2004 5:10 am

Just bumping up one last time .

Anybody have any of the answers?

Thanx EKLB

kcbooboo · Post by **kcbooboo** » Mon Apr 26, 2004 5:44 am

The Maxtrac and Radius manuals have a section in the front that shows the model-dependent parts, for example the 2/8/16 channel front panels. The labels that say things like "Maxtrac 300" or "Radius 100" are all described on those sheets in the front, based on the band/power of the model you have. There are also a lot of complete assembly part numbers here, for things like the logic board, RF board, PA, cables, etc.

I'd suspect that the portable manual has a similar section in the front with model-specific part numbers provided.

One part number that's very hard to find is the internal two-wire speaker cable. On my manual, it's shown at the bottom of the parts list for the assembly drawing, but more like a footnote. You'd think they could have shown it in the drawing and given it a proper reference. Unfortunately, while they provide the part number on the 2-channel drawing, they omit it on the 8/16 channel drawing, which is what I had, and could never find, until one day I decided to look at every page through a fine tooth comb, and there it was.

If you don't have a manual, send me a PM with exactly what you're looking for and I'll check my manuals when I get home.

Bob M.

Al · Post by Al » Mon Apr 26, 2004 6:11 am

OK, Eric, here we go:

GP300 Nameplate 1380992Z03 .85
Maxtrac Nameplate 3380017N14 1.86
RJ45 connector - no p/n have to order complete cable assy
GP300 internal mic 5013920A03 2.60
GP300 speaker 5005589U05 5.57
GP300 DTMF board HLN9951A 84.01

Al · Post by Al » Mon Apr 26, 2004 6:16 am

Forgot the p/n for the flex for GP300:
3080560D01 3.05

EKLB · Post by **EKLB** » Mon Apr 26, 2004 11:15 am

Thanx AL

Now im wondering if M was having some problems because all part numbers matched mune with the exception of your number for the GP300 speaker = I had U04 and you show U05 at the end.

I think ill call my order in and see what happens =My MOL says numbers no good and to refine my search ect on several of the numbers for some reason.

Thanx again EKLB