Motorola Radius P50 schematic

[dander1860]

I'm looking for a schematic for the Motorola P50 talkie. I have several of them and need it to do some disasembly


Thanks

[Monty]

I'm looking for a schematic for the Motorola P50 talkie. I have several of them and need it to do some disasembly

Well ?

If you are not in a immediate rush ( as I have been pretty busy )
I do have most of the documents on the P50 Series Radios

Once I know the Model / Range you have, I will try and
get you the " Proper " Manuel Number, and since its pretty
detailed, you might want to consider just ordering one.

I do not mind doing that for you so long as you have patience
as I a lot to deal with on a daily basis.

However, you will need to be a little more definitive !

P50's were made in many ranges, VHF, UHF, in addition
to the Models, Motorola made a " Number " of RF Boards
some that require tunning, some that did not.

And although the layouts are close, they are not good
enough to know what goes where !

All of them required ( Freq Setting Adjustments ) and it can
be a pain to make changes.

I made a " Special Housing " to alow the user to make all
of the adjuments with the Housing in place, and once adjusted
all you would have to do is transfer the guts from the Test housing
to the Original one

The Jig below was made for both models:

[dander1860]

the model number is h44gnu6120an.