Very strange indeed. The radio IS a D43KXA7JA7CK and I have checked the Range 'bit' in the radio, Range 2 146 to 174.
The real problem is when in the alignment Menu, either thru RSS or front, the radio displays 430.025, the tune up frequencies for a 438 to 470 Spectra. The Alignment Menu does not work because the radio is a VHF and it is being 'told to' do the wrong test freqs. I can adjust the soft pots in the alignment screens.
Other than that the radio works to spec.
Is there some 'bits' that are wrong in the Command or MLM ?
Very strange Spectra
Moderator: Queue Moderator
Strange Spectra
Hi Will. I have seen this when taking an MLM from a Spectra from 1 freq range and hacking it into a Spectra from another freq renge. I cant remember what the cure was, but that was the reason.
Randy
Randy
Well, it apparently was at least onceWill wrote: So, I guess that the data is in the MLM memory. Now the question is: can it be changed?
Sorry I have no help to offer, but I'm confident you'll figure it out in short order.
Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
Strange
Yes it can. You can copy and paste the configuration data, asuming you can find another MLM, same firmware, and you have an eprom programmer. I have made an adapter to allow addressing the chips without removal from the board. I dont know of any easier way to recover a faulty MLM, sorry.
Randy
Randy