secure carrier boards battery HELP!
Moderator: Queue Moderator
secure carrier boards battery HELP!
Does anyone know where i can get new secure carrier board batteries??
Last edited by nypdcar1 on Wed May 04, 2005 5:55 am, edited 1 time in total.
Key retention
How do you do that, Will? With a good battery on the carrier board, can you program the radio to retain the key with loss of power?
jumper
Hi Will Can the location of the req'd jumper be described from the photo posted by Maxtrac300?
Randy
Randy
-
- Posts: 19
- Joined: Sun Apr 24, 2005 12:45 pm
I can host the photo too! just send it to maxtrac300@hotmail.com
carrier mod
Hi Will. My board is a little different, HLN6345A. But looking at your pic, it looks like the jumper basically grounds the - side of the battery to a ground bus on the carrier board. Looking at my carrier board, this ground function is completed by the radio when the board is installed, but when the board is removed, the ground disappears. Is this correct? If the jumper is installed, would that drain the carrier board battery sooner, if the radio sat without power? Thanks for your help, its been great.
Randy
Randy
carrier board
Thanks again, Will, that is a great tip.
Randy
Randy
-
- was grem467
- Posts: 1145
- Joined: Mon Jul 21, 2003 12:46 pm