I've started using my HT1250 more then my HT1000 lately. I've programed the channels that I used in HT1000 in a new zone in HT1250. With the HT1000 I had Dynamic Priority set up so that the selected channel was the priority channel. If I switched channels, then the priority in the scan list was changed. I can't seem to figure out how to do this with the 1250. Also the 1000 would alert me (beep) when the priority channel unmuted. I would also like to set this up on the 1250 also. Can anyone help me out ? I also can't seem to get the PTT Sidetone to work even thou I enabled it.
Thanks in advance.
Doug
HT 1250 Scanning
Moderator: Queue Moderator
In your scan list, make "<Selected>" the FIRST entry in your scan list. Populate the rest of the list. Then go to the options tab for that list and you'll see the priority buttons active; check the box for 1st priority. (I recommend against the second priority for any function.)
Don't forget that each "personality" has to have a scan list associated with it in order to invoke the scan function when that personality is "selected."
Don't forget that each "personality" has to have a scan list associated with it in order to invoke the scan function when that personality is "selected."
- 11439
- Posts: 11
- Joined: Tue Feb 21, 2006 3:02 pm
- What radios do you own?: Motorolas and Icom andEriccson
HT1250 / GP680
How can i use the software (CPS) from HT1250 to use on the GP680?