Schematic for Smart RIB

Haloncloud · Post by **Haloncloud** » Tue Oct 11, 2005 4:41 pm

Looking for schematic for Smart RIB. Trying to repair RLN1015D.

Thanks, Haloncloud

kc7gr · Post by **kc7gr** » Tue Oct 11, 2005 5:30 pm

Haloncloud wrote:Looking for schematic for Smart RIB. Trying to repair RLN1015D.

Thanks, Haloncloud

Good luck. Motorola did not make schematics of that particular unit available that I know of. Even if they did, the SmartRIBs are far more complex than their regular brethren, and they use a proprietary ASIC as well. If the problem happens to be within that ASIC, you're sunk.

My advice would be to send it to the Motorola test equipment repair depot. I think the flat rate is $160 or so.

Keep the peace(es).

GlennD · Post by **GlennD** » Wed Oct 12, 2005 6:17 am

I have the manual with schematics around here somewhere. I will look for it this evening. I also have a bad smart rib that I paid $25 for. I will sell it for the same plus shipping.

Post by **xmo** » Wed Oct 12, 2005 6:48 am

6880309F20 @ $5.90

GlennD · Post by **GlennD** » Sat Oct 15, 2005 8:31 am

To those that I promised a scan of the schematic, The manual has escaped from my manual cabinet. If I find it I will scan the schematic. If the part number referenced by xmo is still available that would be the way to go.

GlennD · Post by **GlennD** » Thu Oct 27, 2005 4:59 pm

I found a manual at work and I made a few copies of the schematic, parts layout, and parts list.

The schematic is to large to scan so if four people need this info PM me and I will tell you where to send a self addressed STAMPED envelope.

Schematic for Smart RIB

Schematic for Smart RIB

Re: Schematic for Smart RIB