Digital Capable Repeater using Maxtracs Specs

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Digital Capable Repeater using Maxtracs Specs

Post by The Pager Geek »

Ok, after much refinement and testing.

Astro Capable Maxtrac Repeater

This is a Microsoft Visio drawing. If you don't have Visio, you will need Visio Reader to read it. It's a free download from Microsoft.

Visio Reader Download

This modification is for Ham use only. It's not meant for commercial use, and god forbid NOT Public Safety use.

Remember this mod is transparent. ANYTHING it hears that breaks squelch, including intermod and spurious noises, will get repeated. Choose your sites wisely.

tpg

[made sticky by Alex]
Experienced Provider of Useless Information
User avatar
Fuel4300
Batboard $upporter
Posts: 563
Joined: Wed Jun 11, 2003 12:36 am

Post by Fuel4300 »

Wow. Thanks for the diagram. This will be high on my list of projects for the summer.

How does this differ from a factory or home-brew RICK?

Mike
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Post by The Pager Geek »

The TX audio must be routed to the new point of entry, otherwise, it gets filtered and 4 level FSK won't pass.

RICK's point of entry was filtered, and the RICK has adjustments not needed. Alhtough I suppose you could use a RICK as transparent enable / disable as long as the audio doesn't get routed thru it. Only the call alert I/O.

tpg
Experienced Provider of Useless Information
CTAMontrose
was grem467
Posts: 1145
Joined: Mon Jul 21, 2003 12:46 pm

Post by CTAMontrose »

these things do work good, ive been using one as a same band ASTRO link repeater for a few months..

would recommend doing the maxtrac power mods and putting active cooling on the radios as these puppies get hot.

get them aligned for proper ASTRO deviation and they work great.
User avatar
mancow
Batboard $upporter
Posts: 2374
Joined: Sun Sep 09, 2001 4:00 pm

Post by mancow »

Cool. Thanks for being the one to finally put it in a form that can be seen.

I just built a portable repeater from two king LPH handhelds. I would like to make it pass securenet but I'm struggling with the same issue of how to select the proper audio path.

Short of using some sort of pl decoder that senses analog and a specific tone to switch in the analog audio path I can't figure out what to do. I would like to make it automatically sense what type of modulation is going through it but I guess that's not going to happen.


mancow
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Post by The Pager Geek »

12K data (Analog Securenet) won't pass thru this either. That's a bit too much. 9600bps (4800 Baud, 4-level) will.

[edited terminology to make wowbagger sleep at night]
Last edited by The Pager Geek on Tue Jun 07, 2005 6:48 am, edited 1 time in total.
Experienced Provider of Useless Information
User avatar
jnglmassiv
Batboard $upporter
Posts: 512
Joined: Sun Feb 24, 2002 4:00 pm

Post by jnglmassiv »

Wow..really nice work.

You know, you can save Visio drawings as jpegsto make this type of distribution easier. FYI.
User avatar
RADIO43
Batboard $upporter
Posts: 743
Joined: Thu Oct 17, 2002 10:46 pm
What radios do you own?: 900 MHZ APX4000

Post by RADIO43 »

Pager Geek,

Is it possible to do the same with two GM300's. I am sure it is, but just want to ask before we start the project. Thanks in advance.

Radio43
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Post by The Pager Geek »

Yes, different locations but the principal is the same. It's been done.

tpg
Experienced Provider of Useless Information
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Post by radio-link »

The Pager Geek wrote:12K data (Analog Securenet) won't pass thru this either. That's a bit too much. 9600 Baud 4-level will.
I did a repeater with some old crystal controlled radios, doing FM, APCO25 and 12kbit securenet just fine. The old stuff sometimes is much easier to adopt to those new modes :-)
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
User avatar
firemedic4
Posts: 1142
Joined: Sat Dec 29, 2001 4:00 pm

repeater

Post by firemedic4 »

Would it work with a gr1225 ???
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Re: repeater

Post by radio-link »

firemedic4 wrote:Would it work with a gr1225 ???
I do not know this radio, and I never tried...
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
RADIOMAN2002
Posts: 1102
Joined: Thu Apr 04, 2002 4:00 pm
What radios do you own?: More than I can count

Post by RADIOMAN2002 »

While this not usefull for Astro, or at least I havn't tried it yet, using MX-S or crystal version portables work great for Securenet. You will need either a Secure MX portable as a reciever or a Securenet box from a Syntor or SyntorX to get the reclocked digital signal, then merely rerout to the PL input of the radio.
WB5ITT
Posts: 59
Joined: Thu Sep 01, 2005 8:09 am
What radios do you own?: Motorola, GE, Kenwood, Yaesu

Post by WB5ITT »

Would this be possible with Astro Spectras? I have a need for this on commercial service and if I can use Astro Spectras to require the correct digital code to key up the opposite transmitter, it owuld be perfect!! (it would actually be two back to back radios...one talking to a Quantar, the other talking to mobiles in a rough area that cannot talk directly to the main rptr). I could use the BUSY light off the head to key the opposite transmitter..of course I will need 4 radios to do this full duplex in both directions (but I have plenty of spares!! ;)
HMM time to hit the bench with this idea..
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Post by The Pager Geek »

http://batboard.batlabs.com/viewtopic.php?p=59727#59727

Read this thread. You may be able to double vocode the audio, but not a passive repeater like the maxtracs.

tpg
Experienced Provider of Useless Information
USGOVTECH
Posts: 230
Joined: Sat May 04, 2002 3:00 pm

Post by USGOVTECH »

I have done thie with the Icom 1821D radios and 2721D radios. They work like a champ. Just put fans on the TX radio. I have 3 portable systems in use to date with many more to come, However only one NAC ,and TG can be used.
giantcake
Posts: 71
Joined: Wed Nov 26, 2003 8:26 pm

Visio

Post by giantcake »

You can download a driver from Microsoft to allow Explorer to view the Visio drawing. Firefox seems to work OK also. Works here anyway. This is an alternate program location:

http://ets.strose.edu/Resources/softwarelist.asp


-Steve

FYI, Cool idea, will have to work on trying this out, my Astro Saber will be happy!
flecom
Posts: 36
Joined: Mon Sep 12, 2005 6:38 am

Post by flecom »

do you think this repeater might pass other digital voice modes? like for example GE AEGIS or ProVoice?
Zap
Batboard $upporter
Posts: 150
Joined: Tue Nov 05, 2002 9:28 pm

Post by Zap »

[quote="The Pager Geek"]12K data (Analog Securenet) won't pass thru this either. That's a bit too much. 9600bps (4800 Baud, 4-level) will.

[edited terminology to make wowbagger sleep at night][/quote]

What would have to be changed to force it to pass securenet, theoretically.
User avatar
zulu
Posts: 79
Joined: Sun Apr 23, 2006 8:53 pm
What radios do you own?: Alot but, I always want more!

Post by zulu »

Wow, gives a whole new meaning to astro repeaters.
"Say what you mean, Mean what you say."
bwigg
Posts: 61
Joined: Mon Mar 10, 2003 7:51 am

Post by bwigg »

I found a program over at Radio Reference named the Knack. It decodes NAC codes. I haven’t tried the Knack, but I was wondering if it would be possible for someone to write a program similar to the Knack to decode the NAC of a receiving radio and use it for a COR input to a controller? It seems if it can decode and display the NAC ID, with a few mods to the code it could be changed to allow serial port control for a specific NAC. If that would be possible this would solve the problem of running a wide open transparent repeater for IMBE. You could write the software to allow only specifics NACs to give you a low or high on one of the serial port pins. You could use this signal similar to a digital COR signal line. If the proper NAC is present it would allow a repeater to key, if not it will not key up on noise or skip.

This could be run a cheap laptop or PC. Since there are thousands of low end machines laying around.

Would this work? Or am I just delirious from the heat?
N9LLO
Posts: 788
Joined: Sat Sep 08, 2001 4:00 pm

Post by N9LLO »

bwigg,
I havent been able to find the program you mention. Cou you post a link?

Chris
MattSR
Posts: 770
Joined: Mon Apr 21, 2003 10:00 pm

Post by MattSR »

We are massively off topic but here it is:-

http://www.radioreference.com/forums/sh ... hp?t=32528
MattSR
Posts: 770
Joined: Mon Apr 21, 2003 10:00 pm

Post by MattSR »

How far out of band can these puppies go? If I were to set one up it would have to rx on 433 and tx on 438.. Is this possible with maxtracs or radius?

Thanks,
Matt
PhoneMan
Posts: 3
Joined: Wed Aug 23, 2006 7:30 am

Post by PhoneMan »

Ive been trying to use a GM300 for the transmitter, GE master II reciever.
I found the COR time faster and audio was alot flatter with the GE reciever, problem I am having is the decode at the other portable. The radio (other p25 radio not repeater radios) dosent pass audio like its trying to decode and then gives up and processes it as analog noise. Help me out here guys, audio levels are below clipping and dev set at 2.3k. Got audio from vol/sql high (buffered discriminator) going to the TX flat audio pin in on the GM300. I canot see anywhere on the GM300 that has a TXA printed on it like the Maxtrac. Any ideas will help alot, works perfect with analog and DPL...just not p25. Thanks
bellersley
No Longer Registered
Posts: 872
Joined: Tue Feb 22, 2005 7:03 am

Post by bellersley »

Well now. I have a nice MSF5000 sitting here not doing anything useful. I wonder if you could use the theory and such in this "hack" to work on an MSF. Or maybe even a GR1225. That'd kick a$$.
User avatar
mancow
Batboard $upporter
Posts: 2374
Joined: Sun Sep 09, 2001 4:00 pm

Post by mancow »

It may be a rough way to do it but is there anything about the IMBE undecoded "audio" that is rhythmic enough that a circuit could somehow discern it from regular analog transmissions?

I'm thinking of something along the line of a pl type decoder that sees something unique in the modulation and can trip a logic line.
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

bellersley wrote:Well now. I have a nice MSF5000 sitting here not doing anything useful. I wonder if you could use the theory and such in this "hack" to work on an MSF. Or maybe even a GR1225. That'd kick a$$.
Absolutely, according to TPG in this thread:

http://batboard.batlabs.com/viewtopic.p ... f5000+imbe

I don't believe he ever publicly released the MSF details like he did with the Maxtrac. Perhaps he will if he sees this, or you could drop him a PM.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
RADIO43
Batboard $upporter
Posts: 743
Joined: Thu Oct 17, 2002 10:46 pm
What radios do you own?: 900 MHZ APX4000

Re: Digital Capable Repeater using Maxtracs Specs

Post by RADIO43 »

Guys,


HELP, I am ready to go here but looking for instructions to use GM300's. If anyone has any documentation or instructions on the procedure to use GM300's for this project, please forward. Thanks as always.


Kyle
In Time of Crisis, You will Not Rise to the Occasion but Rather Default to your Level of Training!
emsbuff3240
Posts: 423
Joined: Thu Aug 24, 2006 11:23 am
What radios do you own?: Centracom Gold Elite, XTS5K 4K

Re: Digital Capable Repeater using Maxtracs Specs

Post by emsbuff3240 »

Can anyone that has tried this confirm that this works(2 maxtracs)?

Thanks
-Jon
-Jon
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Re: Digital Capable Repeater using Maxtracs Specs

Post by alex »

emsbuff3240 wrote:Can anyone that has tried this confirm that this works(2 maxtracs)?

Thanks
-Jon
I've heard it work a couple of times. I know I've used at least one built by the author of the modification.

-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
User avatar
zulu
Posts: 79
Joined: Sun Apr 23, 2006 8:53 pm
What radios do you own?: Alot but, I always want more!

Re: Digital Capable Repeater using Maxtracs Specs

Post by zulu »

I wonder if the same would go for the CDM series?
"Say what you mean, Mean what you say."
SlimBob
Posts: 911
Joined: Thu Dec 18, 2003 11:38 am

Re: Digital Capable Repeater using Maxtracs Specs

Post by SlimBob »

Yes, but will it pass D-Star?

*ducks*
WV8VFD
was KD8CPP
Posts: 242
Joined: Tue Apr 17, 2007 8:50 am
What radios do you own?: WAY TO MANY

Re: Digital Capable Repeater using Maxtracs Specs

Post by WV8VFD »

What i want to know is, could you have a Astro Spectra for recieve, and port the audio from it into the mic. port of another Astro Spectra, or the XTL series for that matter?
Tyler Lewis
bellersley
No Longer Registered
Posts: 872
Joined: Tue Feb 22, 2005 7:03 am

Re: Digital Capable Repeater using Maxtracs Specs

Post by bellersley »

KD8CPP wrote:What i want to know is, could you have a Astro Spectra for recieve, and port the audio from it into the mic. port of another Astro Spectra, or the XTL series for that matter?
Yes you certainly could. However. The re-transmitted audio won't be as good as what you'd get from the Maxtrac pass-thru repeater. In your example, you would be "double vocoding" which will most likely lead to considerable audio quality loss. Any "artifacts", that is, packet losses and other digital "noise" would be greatly increased in the repeated audio.

If the RX signal is very strong and the decoded audio has a very low bit error rate, the re-transmitted audio won't be bad at all, but as soon as you start getting iffy RX audio, expect TX audio to go down the tubes.

But, if you have two astro radios sitting around and want to give it a try, you might find it works just fine for you.
libuff
Posts: 371
Joined: Fri Mar 25, 2005 5:21 pm

Re: Digital Capable Repeater using Maxtracs Specs

Post by libuff »

SlimBob wrote:Yes, but will it pass D-Star?

*ducks*
i think its best answered by asking another question... whats the bitrate of D-Star vs the bitrate of ASTRO
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Re: Re:

Post by radio-link »

radio-link wrote: I did a repeater with some old crystal controlled radios, doing FM, APCO25 and 12kbit securenet just fine. The old stuff sometimes is much easier to adopt to those new modes :-)
OK, now I have set up a repeater with two GM1200 (european MTP1327/1343-trunking radios in conventional mode, Renaissance-series M01RFL9CK4AN), and D-Star passes quite good through it! Unfortunately I still can not program the Astro Sabers due to "codeplug to new" to the repeaters frequency, so I could not test if it works for P25, but I guess it will do.

The repeater is described at http://www.db0fue.de, but up to now only in german. Maybe I will find to translate the site into english druing the next one or two weeks, at least the technical details.

What I did is simply program both radios with "data channels", connect CSQ to PTT and demodulator out to modulator in. That was it :-)
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Re: Re:

Post by radio-link »

radio-link wrote:... so I could not test if it works for P25, but I guess it will do.
Update: D-Star and P25 work just fine; also in a cross band repeater setup with four radios (2*146 MHz, 2*440 MHz) it works great and is able to connect both bands together, FM, D-Star, P25, whatever you want to use. The "live" repeater however still is 440 MHz only, I do not have a frequency assignment for 146 MHz for it - so it was just a test on the workbench.
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

Seems like this post is slightly ancient, however if I could revive it with your help...

1. For whatever reason after downloading the application (maxtrac how to file) to open the file, it won't open. Any suggestions?

2. To be able to coordinate a pair on VHF, we will have to have a NFM 12.5k spacing machine, is this Maxtrac and/or MSF modification plan a NFM or standard 25k deviation repeater?

3. Has anyone been able to enable a NAC computer controlled decode COR signal by using Knack or similar PC programs? Something that will see the NAC, enable the serial port, a box to convert the serial info to a high/low pulldown for a simple controller?

Thanks to those who have first hand knowledge on this project.
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

I got the visio reader to work, so here is a new very important question...

- Will this work with two VHF GM300s (Maxtracs)?

- Hard to tell by this schematic if when in non-PL "APCO" transparent mode, does the transmitter stay keyed all the time or does it only engage on a COR signal? I didn't see any sort of a "controller" in there for this logic.

I hope it would work on VHF and be capable of NFM? If I am correct, isn't ASTRO mode done in NFM mode by the user radios automatically anyway?

Thanks!
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Re: Digital Capable Repeater using Maxtracs Specs

Post by radio-link »

W1HVN wrote:I got the visio reader to work, so here is a new very important question...

- Will this work with two VHF GM300s (Maxtracs)?

- Hard to tell by this schematic if when in non-PL "APCO" transparent mode, does the transmitter stay keyed all the time or does it only engage on a COR signal? I didn't see any sort of a "controller" in there for this logic.

I hope it would work on VHF and be capable of NFM? If I am correct, isn't ASTRO mode done in NFM mode by the user radios automatically anyway?

Thanks!
I did not use this schematic, but with my GM900/GM1200 setup I used the carrier squelch to key the transmitter. Of course it would be possible to find other solutions, but for me it works just fine this way. It allows usage of FM, P25 and D-Star on one repeater.
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
User avatar
mancow
Batboard $upporter
Posts: 2374
Joined: Sun Sep 09, 2001 4:00 pm

Re: Digital Capable Repeater using Maxtracs Specs

Post by mancow »

I have mine setup with two maxtracs and a TP-3200 tone panel running in carrier squelch mode. I was able to retain the use of the controller features such as hang time and CW ID by modding the controller with a small reed relay. What happens is that the LED in the panel that signals the presence of a carrier runs the small relay. When the relay closes it basically eliminates all the signalling features of the panel and makes a straight audio path through it. That keeps things clean for the use of P25 or DStar. When the LED goes dark the audio path is reconnected and the CW ID is played normally. It makes for a nice silent hang time as well. An end of transmission tone is sent by the transmit radio which is programmed with a short two digit DTMF Id set to post transmission. The setup is placed in a 19" rack and connected to a Milcom 160 watt amp that feeds a set of Wacom duplexers.
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

Ok, we are in the process of putting together a cple GM300s on VHF. Here is our question, same question that was asked back in 2006, with no response. Maybe someone has done this mod with a pair of GM300s. If anyone has done this, please send a reply.

Here was the question back in 2006

Phoneman wrote:
"Help me out here guys, audio levels are below clipping and dev set at 2.3k. Got audio from vol/sql high (buffered discriminator) going to the TX flat audio pin in on the GM300. I canot see anywhere on the GM300 that has a TXA printed on it like the Maxtrac. Any ideas will help alot, works perfect with analog and DPL...just not p25. Thanks"

We have the TX GM300 open, no TXA on the board as the Maxtrac has. Where do we insert audio bypassing any filtering on this radio?

Does pin 5 "TX Flat Audio" accomplish this? Was his problem due to incorrect point where audio was inserted or something else?

Thanks!
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

Success! We have mated two GM300s with a simple controller to infuse CWID, only after radio unkeys. Hang time is less than 1 sec.

More details to follow!

Coming soon to Durham, CT: Analog/P25 dual mode repeater.

Some extra circuitry had to be implemented, however it does work well.
KE7JFF
Posts: 270
Joined: Sun Nov 02, 2008 7:27 pm
What radios do you own?: MX300 lunchbox

Re: Digital Capable Repeater using Maxtracs Specs

Post by KE7JFF »

I recently got access to a bunch of Micors and I wonder if I can use the same principal on them for this.

Anyone ever try this wtih Micors out of curiousity?
Mountain Wave Search & Rescue http://www.mwave.org
Support Search & Rescue: Get Lost!
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

We have an older Micor for UHF as well, and in theory it should work as long as you can find the points on the rx and exciter to bypass filetering. One word of caution, do some experimenting and see if by bypassing such filtering if you also bypass any limiting as well, if so you may exceed your 5k dev limit in analog. P25 is reported to be 3.5k dev in wide fm with the GM300s.

The repeater in CT has been up and running and has done an exceptional job.

147.1650 (+) with a NAC of 073 or PL of 77.0Hz - Durham, CT
N9LLO
Posts: 788
Joined: Sat Sep 08, 2001 4:00 pm

Re: Digital Capable Repeater using Maxtracs Specs

Post by N9LLO »

How did you implement the NAC control?

Chris
N9LLO
User avatar
W1HVN
Posts: 417
Joined: Tue Dec 09, 2008 11:46 am
What radios do you own?: MX300 w/DVP

Re: Digital Capable Repeater using Maxtracs Specs

Post by W1HVN »

Sorry, perhaps it's a bit misleading. The repeater is "open" in CSQ. All of our users use a NAC of 073 or PL 77.0 on the system, however in actuality, any can be used, these are our set standards. The end user unit encodes, decodes and is the "gatekeeper" of what comes through the speaker, the repeater just spits out what it hears. If using analog and a PL, you get a "gated squelch" type product, which is nice. Until someone springs for the Quantar, this is it folks! I'm just a partial owner, another amateur operates the repeater. He is trely the brains and capability behind the repeater.

BTW, the repeater has moved to a new frequency:

It is on 146.415 with an input of 147.415

Still in Durham, CT.

If in the area, check in.
User avatar
boteman
Posts: 69
Joined: Tue Nov 30, 2004 2:20 pm
What radios do you own?: AudioMate 360

Re: Digital Capable Repeater using Maxtracs Specs

Post by boteman »

KE7JFF wrote:I recently got access to a bunch of Micors and I wonder if I can use the same principal on them for this.

Anyone ever try this wtih Micors out of curiousity?
I have not tried this particular application with Micors, but either a base or mobile UHF Micor would be suitable as they use direct FM of the crystal for modulation. The mobile actually modulates the 11.7 or 16.7 MHz offset oscillator while the base station modulates the channel element. In both cases you would want to bypass the square blue chip that provides audio shaping and limiting. The analog audio when fed this way is schweeeet!

The VHF base station Micor exciter is also direct FM, while the mobile VHF Micor used phase modulation and would not be suitable to this application.

I don't know what waveform shaping is inherent in the recovered signal from the buffered discriminator, but feeding the audio to the exciter this way could certainly splatter so watch your deviation carefully. Others can advise on the proper setting for best performance of both analog voice and digital modes.

***
I have mistakenly programmed a CDM1550 to use the pin 5 "flat audio" input for a generic, run-of-the-mill remote application and regret it. The audio is not filtered nor limited, so while it would be good for this application, it stinks for plain LMR voice because I can't get sufficient punch out of the audio without it splattering.

So pin 5 flat audio for data and transparent audio into the transmitter,

pin 2 for regular old fashioned limited mic audio in.
Last edited by boteman on Fri Apr 17, 2009 12:34 pm, edited 2 times in total.
User avatar
boteman
Posts: 69
Joined: Tue Nov 30, 2004 2:20 pm
What radios do you own?: AudioMate 360

Re: Digital Capable Repeater using Maxtracs Specs

Post by boteman »

The Pager Geek wrote:Ok, after much refinement and testing.

Astro Capable Maxtrac Repeater
I converted the above Visio diagram to Adobe PDF. It's about 12KB for your download from my web site.

Astro capable Maxtrac repeater schematic
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”