This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.
Does anyone know if the remote cable for the Astro Spectra Plus is the same cable used for a standard Spectra radio or an Astro Spectra. The reason I ask is that I installed as Astro Spectra + in my car, remote mounted, and all features on the radio work fine but I can't program it. Putting it back together as one piece and it programs fine.
You have the wrong board on the drawer unit. It should be HLN6344. You have a non securenet spectra interface board. The HLN6186 will also not work as this is a securenet spectra interface board, not astro spectra.
Jason
Last edited by jmr061 on Sun Mar 26, 2006 6:09 pm, edited 1 time in total.
If the radio were a regular astro spectra not the plus then the board you currently have would work but you wouldn't be able to keyload securenet into it.