Hey guys; I'm programming up an MCX1000 and have a quick question about scanning.
In the "Zone Data" screen, it asks for a "Scan Type" of either X, R, T, 1 or 2. I'm going to make the assumption that T = Tone Scan, and 1/2 are Priority Scan. But, what are X and R?
Thanks!
MCX1000 Scan Question
Moderator: Queue Moderator
-
- No Longer Registered
- Posts: 872
- Joined: Tue Feb 22, 2005 7:03 am
- OCSD117
- was RPDM313
- Posts: 615
- Joined: Mon Mar 21, 2005 8:52 am
- What radios do you own?: XTL2500, APX3000, APX7000
Re: MCX1000 Scan Question
I think they have something to do with the securenet but i could be wrong never actualyl tried it on the MCX1000's I had
Carlwood Lipton: [real life interview with Lipton where he recites a quote from William Shakespeare] From this day to the ending of the world we in it shall be remembered. We lucky few, we band of brothers. For he who today sheds his blood with me shall be my brother.
Re: MCX1000 Scan Question
X = Carrier Squelch
T = Tone Squelch
R = Repeater Tone Squelch
1 = Priority 1
2 = Priority 2
L = mode locked out of SCAN list
T = Tone Squelch
R = Repeater Tone Squelch
1 = Priority 1
2 = Priority 2
L = mode locked out of SCAN list
-
- No Longer Registered
- Posts: 872
- Joined: Tue Feb 22, 2005 7:03 am
Re: MCX1000 Scan Question
Excellent, thanks!
What's the difference between Tone Squelch and Repeater Tone Squelch though? Doesn't quite make sense!
What's the difference between Tone Squelch and Repeater Tone Squelch though? Doesn't quite make sense!