Hello all,
I have a question about the PIN OUTS for the Saber Vehicle Charger Units. I have the lists from the model specific area, however I just want to confirm that:
I put 12V to 11 and 24? Also what is PIN 5 for?? Also PIN 1???? do I place that one to Ground????
JonGage
Below is a cut and paste from the model specific area.
SVA Connector Pinouts
Interface Connector
Pin Description
1 Self-test (gnd on power-up)
2,3 V-
5 High on squelch open
11,24 V+
20 Audio+
21 Audio-
Power
Red + Power
Black - Power
Yellow Ignition Sense (disables battery charger)
Green Headlight Sense (turns on panel lights in MVA)
LED Function
Saber Vehicle Charger PIN OUT Questions
Moderator: Queue Moderator
-
- Posts: 613
- Joined: Sat Jun 26, 2004 3:35 pm
Re: Saber Vehicle Charger PIN OUT Questions
NOOOOOOOOOOOOOOOOOOOOOOOOOOO
You put NO power to the DB25!
Just the 4 pin molex.
You put NO power to the DB25!
Just the 4 pin molex.
"TDMA = digital and same great taste, half the bits"
Re: Saber Vehicle Charger PIN OUT Questions
otay, Just hook up the speaker to the DB25 right??
-JonGage
-JonGage
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: Saber Vehicle Charger PIN OUT Questions
As you probably already know, the audio from the 5487 goes to a powered speaker, and the audio being fed to the speaker board is line level. You don't do anything with the DB25 connector except to plug the speaker unit into it. Anything the speaker unit needs is sent from the 5487 and vice-versa. I imagine you could, if absolutely necessary, pick off the audio and send it to an external amplifier. I have a diagram of the speaker circuit around here somewhere if you need it. Send me your snail mail address via PM and I'll send the diagram to you.
Regards,
Regards,
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.