MTR2000

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
conrad72
New User
Posts: 1
Joined: Wed Aug 03, 2011 9:00 am
What radios do you own?: Motorola Icom Yaesu Kenwood

MTR2000

Post by conrad72 »

Is there any mod to bring a MTR2000VHF via software into Ham Band? Or, if anyone is up for an even swap for a high power amp TTD197 100watt VHF 150-174 PA for TTD1972 135-154 100 PA, please let me know?

Regards
Conrad ( W4RCC )
VE3TUH
Posts: 301
Joined: Fri May 24, 2002 3:14 pm
What radios do you own?: more than I should...

Re: MTR2000

Post by VE3TUH »

I modded my vhf high power, high split pa, tricking the station into thinking it is a vhf 40 watt pa. Worked like a charm.

Randy
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: MTR2000

Post by d119 »

Eh details on this???
VE3TUH
Posts: 301
Joined: Fri May 24, 2002 3:14 pm
What radios do you own?: more than I should...

Re: MTR2000

Post by VE3TUH »

d119 wrote:Eh details on this???
Change R4560 from 1.5 K to 4.7 K
Change R4564 from 1.5 K to 4.7 K
Its right out of the manual. But you better be good with SMD, or let someone who is do it for you.

Randy
User avatar
MSS-Dave
Posts: 770
Joined: Mon Jun 30, 2003 6:02 pm
What radios do you own?: XTL5K, NX300, PD782, Spark Gap

Re: MTR2000

Post by MSS-Dave »

You still have full control over power output? No spurious emissions? Cool if it works like the OEM PA....

Dave
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: MTR2000

Post by d119 »

MSS-Dave wrote:You still have full control over power output? No spurious emissions? Cool if it works like the OEM PA....

Dave
Thats what I'd like to know. This would be just the thing to do when it comes time to replace the MSF 5000. If that time ever comes.
VE3TUH
Posts: 301
Joined: Fri May 24, 2002 3:14 pm
What radios do you own?: more than I should...

Re: MTR2000

Post by VE3TUH »

No Spurious on the spectrum. I have an application where I only require 5 to 10 watts out, I tested for spurious down to 5, but am currently sitting at 10. The high power option would only let me down to 20 or 25 watts, I believe. My only concern is longevity of the pa, these things are too expensive to mess about with. You would think that running at minimun power would increase the life of the pa, but perhaps is hard on it in other ways. I dont know. In any case, I'll likley be picking up a couple of high power 3 db attenuators at Dayton next year.

Randy
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: MTR2000

Post by d119 »

What I think we want to know is that by tricking the station into thinking it has a 40W PA, are you still able to make 100W with it? Does everything tune up properly?
User avatar
MSS-Dave
Posts: 770
Joined: Mon Jun 30, 2003 6:02 pm
What radios do you own?: XTL5K, NX300, PD782, Spark Gap

Re: MTR2000

Post by MSS-Dave »

Exactly......
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: MTR2000

Post by d119 »

Details, TUH???
VE3TUH
Posts: 301
Joined: Fri May 24, 2002 3:14 pm
What radios do you own?: more than I should...

Re: MTR2000

Post by VE3TUH »

I gave you the details of what I did. But, specifically, no, I cannot, and do not want, to run 100 watts. I am limited to 40. If you need 100 watts in the Ham band, you will obviously need to trick the pa into thinking it a high power low split. But you will lose the wide band capability.

Randy
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Re: MTR2000

Post by mogman »

OLD thread I know, but I cannot find the parts ID on this PA, none of the manuals have any detailed info about this PA, can anyone help???
Thanks
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”