I have a PM400 and I cannot figure out how to remove "LTR Group 1" from the Channel position list,any idea how to do this ? I don't want to have that in the radio when you scroll through the channels,we don't use LTR anyway.
Where do you program the Ignition sense or is it not programmable like the CDM's are ?
PM400 remove LTR from channel list ?
Moderator: Queue Moderator
PM400 remove LTR from channel list ?
SD70MAC out
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54
Re: PM400 remove LTR from channel list ?
I just did what you want to do with a PR400. When you're looking at the tree view in the CPS, select talkgroup 1, right click on it and then delete it. Then you can go back to the channel position list and it'll be gone.
Ignition sense with the PM series is exactly like the CM200/300 series...it's automatic and nonprogrammable unlike in the CDMs.
Ignition sense with the PM series is exactly like the CM200/300 series...it's automatic and nonprogrammable unlike in the CDMs.
Re: PM400 remove LTR from channel list ?
Thanks Al,that's what I needed.
SD70MAC out
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54