Does anyone have a schematic of the rapid charger for a CP200 portable ? I am trying to find a point that has + voltage on it until the radio is taken out of the charger and then goes to ground .
Thanks.
Motorola CP200 Charger
Moderator: Queue Moderator
Re: Motorola CP200 Charger
I've never seen a schematic for the charger, and it's likely that noone else on here has either...reason being that M considers these throwaway items when they fail because they're cheap to buy. Your best bet may to be to break the + lead from the wallwart and sense current flow in the positive lead then use the result to drive a transistor or relay to output the status that you desire.
-
- Posts: 1477
- Joined: Sat Nov 29, 2003 10:10 pm
- What radios do you own?: AM/FM
Re: Motorola CP200 Charger
reed switch or plunger switch installed in a modified charger. It's what's for dinner.
"How do you plan to outwit Death?"
"With a knight and bishop combination; I will destroy his flank." --Antonious Block
"With a knight and bishop combination; I will destroy his flank." --Antonious Block
Re: Motorola CP200 Charger
I will give that a try, thanks.