Xts3000 Smartnet
Moderator: Queue Moderator
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Xts3000 Smartnet
Evening folks! I have an XTS3000 that is currently connected to a SmartZone network. It works perfectly! The only problem I am experiencing is, when I attempt to connect to a SmartNET system, it gives me "Out of Range". I'm not exactly sure why this is occurring, I've spent hours attempting to fix this. If anyone can give me a hand or a few tips, that would be greatly appreciated! Yes, I have made sure control channels are proper. I live in the city I'm attempting to connect too. I have an MTS2000 that connects perfectly fine. I've checked the flashcode and everything, the radio IS SmartNet capable. Please help me!
Re: Xts3000 Smartnet
First question is, are you using this as a scanner or had this been programmed by the system owner?
Lowband radio. The original and non-complicated wide area interoperable communications system
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
Using it as a scanner, BUT I am a fire academy student and have permission from the system owner to monitor while logged in, and reason being is because my radio is also being used when I go on shift (ride-alongs).
Re: Xts3000 Smartnet
Did he program it or did you?
Lowband radio. The original and non-complicated wide area interoperable communications system
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
No, I'm interested in this type of stuff so he gave me the essentials (Control Channels, System Key, and the Unique ID for the radio) but I can't figure out why it keeps saying out of range whenever I put it in. I have SmartZone working perfectly fine, then SmartNet is just a fail.
Re: Xts3000 Smartnet
My advice to you is to have him program it.
There is fundamentally no difference between SN and SZ that would cause that message, other than something else completely out of wack, radio way out of alignment or something else going on.
All SZ is, is an interconnection of SN systems (breaking it down to its simplest form)
There is fundamentally no difference between SN and SZ that would cause that message, other than something else completely out of wack, radio way out of alignment or something else going on.
All SZ is, is an interconnection of SN systems (breaking it down to its simplest form)
Lowband radio. The original and non-complicated wide area interoperable communications system
- PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Re: Xts3000 Smartnet
Do you have the coverage set to "None"? If it's set to SmartZone it won't work with a SN system if you're parked on the talkgroup itself.
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
I might have to let him program it if I can't get it, but I'm one of those people who can't give up aha.
System Coverage is set to none :|
System Coverage is set to none :|
- PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Re: Xts3000 Smartnet
You can try throwing in a dummy frequency in a conventional channel. Then setup a scan list for the system you're trying to listen to. If it picks up communications, then it's probably not affiliating correctly with the system.
Also, if it's an XTS3000 that doesn't have 9600 trunking in it, set the affiliation to PTT and see if that picks anything up.
If it's one of those, the ID you were given might be bad or you might not be close enough to a tower when it tries to affiliate.
Also, if it's an XTS3000 that doesn't have 9600 trunking in it, set the affiliation to PTT and see if that picks anything up.
If it's one of those, the ID you were given might be bad or you might not be close enough to a tower when it tries to affiliate.
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
I set up the scan list with conventional control channels just to test, and it does indeed pickup the random traffic being put out. Also, how would I know if my XTS3000 is 9600 trunking capable? It can't be the ID because I use the same ID on my MTS2000, which works perfectly. Also, I'm within the city that I'm attempting to connect too, so I most certainly close enough to the tower.
Model #: H09UCH9PW7BN
R05.52.06
DSPN06.04.12
326AZN1809
Flashcode: 100004-000000-4
That's specific for my radio^
Model #: H09UCH9PW7BN
R05.52.06
DSPN06.04.12
326AZN1809
Flashcode: 100004-000000-4
That's specific for my radio^
Re: Xts3000 Smartnet
Miami is a 3600 system
Lowband radio. The original and non-complicated wide area interoperable communications system
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
It's Coral Springs, not Miami.
http://www.radioreference.com/apps/db/?sid=209
http://www.radioreference.com/apps/db/?sid=209
Re: Xts3000 Smartnet
Not sure how your on a smartzone system when the radio only supports smartnet. I'd say you need a host/dsp upgrade as well just to rule that stuff out. If you have a radio on the system why are you putting another one on with the same id?
Jason
Jason
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
I was scrolling through Ebay and found the XTS3k for an unbelievable price, so I had to get it aha, and now here we are. And yeah, I'm stumped.
- PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Re: Xts3000 Smartnet
You can use Akardam's decoder to see exactly what your radio has in it. I can tell off hand yours doesn't because it would usually end with "480-4" so the flashcode would be something like 500008-000480-0.xts3000forlife wrote:I set up the scan list with conventional control channels just to test, and it does indeed pickup the random traffic being put out. Also, how would I know if my XTS3000 is 9600 trunking capable? It can't be the ID because I use the same ID on my MTS2000, which works perfectly. Also, I'm within the city that I'm attempting to connect too, so I most certainly close enough to the tower.
Model #: H09UCH9PW7BN
R05.52.06
DSPN06.04.12
326AZN1809
Flashcode: 100004-000000-4
That's specific for my radio^
Something to keep in mind is your DSP and HOST are really old. The latest DSP was around R07.73 and host was N08.03.05. You might want to consider sending your radio out to be upgraded. There's a few people on the here that will upgrade it for you for around $50. You should have it aligned while it's out if you're doing that.
Re: Xts3000 Smartnet
Your radio (based on that flashcode) supports SmartNet only.
You shouldn't be seeing any smartzone options.
In addition, the radio system you reference is a standard smartnet system.
Sans a hardware or programming issue, it should be good to go.
You shouldn't be seeing any smartzone options.
In addition, the radio system you reference is a standard smartnet system.
Sans a hardware or programming issue, it should be good to go.
Lowband radio. The original and non-complicated wide area interoperable communications system
Re: Xts3000 Smartnet
Actually, without looking up the specific HOST, I bet the radio doesn't have the rebanding firmware in it, so its looking for the channels on the old table, and not current post rebanding table. Pretty sure its HOST 7 or greater that supports rebanding.
Lowband radio. The original and non-complicated wide area interoperable communications system
- PhillyPhoto
- was LuiePL
- Posts: 661
- Joined: Thu Oct 14, 2004 8:09 am
- What radios do you own?: XTS5000, APX2000
Re: Xts3000 Smartnet
Looks like 7.7x is needed (http://batboard.batlabs.com/viewtopic.p ... 32#p376032) since it appears that system has been rebanded.Pj wrote:Actually, without looking up the specific HOST, I bet the radio doesn't have the rebanding firmware in it, so its looking for the channels on the old table, and not current post rebanding table. Pretty sure its HOST 7 or greater that supports rebanding.
Re: Xts3000 Smartnet
Short story, you will need to take your radio to your local Motorola dealer and have them do a "software refresh" for ~$75. If your friend has flashes left, he can do it as well. Also as stated, when you get the radio updated, have it put on a service monitor and benched checked for proper alignment.
Lowband radio. The original and non-complicated wide area interoperable communications system
-
- New User
- Posts: 13
- Joined: Thu Dec 26, 2013 6:36 pm
Re: Xts3000 Smartnet
Alright, I'll see if he can do it for me. Thanks for all the help fellas!