Hello,anyone had a problem with a PMMN 4050A microphone,on a XPR6550,and the audio in digital goes high low.The radio is good without Mic.Just wondering.
Thanks
Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):
If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.
Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.
- Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
Service Software (RSS) or Customer Programming Software (CPS) - Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
- Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
- Any other items which may be deemed as offensive
If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.
Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.
Trbo lapel mic audio quality
Moderator: Queue Moderator
Re: Trbo lapel mic audio quality
What are your audio settings? Suppressor turned on/off? AF Suppressor turned on/off? Distortion control turned on/off?
Re: Trbo lapel mic audio quality
Digital Mic gain was at 16 db,then 6,then 22 because they said that the volume was too low on the receiving end.
John
Re: Trbo lapel mic audio quality
Using gain to make up for poor procedures (not talking directly into the mic) can be problematic.
Digital is a new breed and user training is more important than ever. If the radio doesn't have enough audio level to process, audio quality will suffer.
Digital is a new breed and user training is more important than ever. If the radio doesn't have enough audio level to process, audio quality will suffer.
Re: Trbo lapel mic audio quality
Turn suppression off. That's a noise canceling mic. Don't need audio processing IMHO. Found the same issue with a customer using those mics in analog and they said it improved quality
Re: Trbo lapel mic audio quality
Found out that I needed the NNTN 8383 Mic for their environment.
John
Re: Trbo lapel mic audio quality
So they're using their radios in the shower?
Re: Trbo lapel mic audio quality
The NNTN8383 INC (or NNTN8382 if no earjack is required) mic is amazing. We just did some testing in high noise and it was extremely impressive. We found having AGC turned on worked the best over different noise situations.
Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”
Who is online
Users browsing this forum: No registered users and 0 guests