Hello All,
I have an issue with an IPSC system. I have 4 repeaters in the system now, with the original 3 working flawlessly. When I added the 4th repeater, it will only get traffic from the system, and send traffic that is rx'd to two of the three existing repeaters. All the port settings are identical, so I am not certain what might be causing the problem? Has anyone ever seen this happen before.
Thanks, Rob
IPSC connect issue
Moderator: Queue Moderator
Re: IPSC connect issue
Firmware versions in each repeater?
Re: IPSC connect issue
Ok, you caught me there. I was planning an update once we do the EID for RAS. I'm a bit lazy sometimes.
Master Repeater : 01.07.02
New Repeater just added : 01.06.11
Repeater new repeater doesn't like to talk to: 01.04.01
East Repeater : 02.30.02
Rob
Master Repeater : 01.07.02
New Repeater just added : 01.06.11
Repeater new repeater doesn't like to talk to: 01.04.01
East Repeater : 02.30.02
Rob
Re: IPSC connect issue
Repeater new repeater doesn't like to talk to: 01.04.01
This is older than dirt
This is older than dirt
Re: IPSC connect issue
Off I go to do f/w bumps. Thx for the heads up, rob
Re: IPSC connect issue
F/W issue it were, thanks all.