I searched here and around the net but didn't find anything specific on doing this. I have a standard Minitor II that I want to disable the alert tone but not the alert function. Can anyone tell me how to do this? I have the Minitor II info from batlabs, but I am not seeing a jumper change or part removal that will accomplish this.
Thanks so much.
Minitor II - Disable Alert Tone
Moderator: Queue Moderator
- SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: Minitor II - Disable Alert Tone
Yes. I've actually done the same thing for my pager that stays in my room for night alerts.
If you have a steady hand you will need to remove the SMD resistor R309
The light will still flash while it is alerting, and the pin that goes to the amp charger will still works as well.
If you have a steady hand you will need to remove the SMD resistor R309
The light will still flash while it is alerting, and the pin that goes to the amp charger will still works as well.
- SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: Minitor II - Disable Alert Tone
Thank you!kd5wfy wrote:Yes. I've actually done the same thing for my pager that stays in my room for night alerts.
If you have a steady hand you will need to remove the SMD resistor R309
The light will still flash while it is alerting, and the pin that goes to the amp charger will still works as well.