APX6000/6000XE housing colors
Moderator: Queue Moderator
APX6000/6000XE housing colors
I'm confused about what housing colors are available for the APX6000/6000XE family. The spec sheets say black, yellow and green for both models, but I'm seeing housing kits online like the NHN7071AS in orange, and I see red and blue as well.
Can they all be ordered from the factory in these colors? We're looking at buying in the not too distant future, and would like to color-code to separate the portables per apparatus (i.e., yellow=engine, green=ladder, etc.), and having more than three color options would be helpful.
Can they all be ordered from the factory in these colors? We're looking at buying in the not too distant future, and would like to color-code to separate the portables per apparatus (i.e., yellow=engine, green=ladder, etc.), and having more than three color options would be helpful.
-
- Posts: 345
- Joined: Tue Feb 14, 2006 5:39 am
Re: APX6000/6000XE housing colors
The 6000 and 7000 radios, standard and XE, are available from the factory in black, yellow, and green. APX XE models give you a color-matching top controller and speaker grille when you order one of the three color options. The standard APX only has a black top controller available for all three housing colors (looks strange after seeing an XE with matching top plastic). The red, blue, and orange colors you refer to replace only the black outer housing (I think of it like an APX 'shirt'). The 'hat' (top controller), the 'tie' (speaker grille), and the 'shoes' (batteries) all remain black. I have only seen the colored housings available for the 7000. Someone else might chime in on the availability via the 6000. Hope this helps. -Jeff
-
- Posts: 345
- Joined: Tue Feb 14, 2006 5:39 am
Re: APX6000/6000XE housing colors
Clarification...standard APX speaker grilles remain in whatever color you got from the factory (or order yourself a different one from parts after the fact)...black, yellow, or green. So you could have an APX6000 with the black top controller and battery (only thing available), the black, green, or yellow speaker grille originally put on the radio, and if they make the other colored housings for the 6000 (again, not sure), a red, blue, or orange housing. Yikes, who dressed THAT radio? Call the Motorola fashion police. But yes, the other housings do make it easy to quickly identify radios with different functions or programming (i.e., SWAT, rescue, command, RIT, etc.) - Jeff
Re: APX6000/6000XE housing colors
Since they don't seem to allow ordering the other colors from the factory, I'm wondering how hard it is to swap the housing pieces. Realistically though, I doubt that we would bother. I would have been nice to be able to get them from the factory in any color.
- MTS2000des
- Posts: 3347
- Joined: Sat Jan 04, 2003 4:59 pm
- What radios do you own?: XTS2500, XTS5000, and MTS2000
Re: APX6000/6000XE housing colors
Not hard at all to swap the main housing and speaker grille, the control top is quite a bit more involved.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
Re: APX6000/6000XE housing colors
Can anyone confirm the actual availability of housing colors other than black, green and yellow for the 6000XE? I've found part numbers for red, blue and orange for the regular 6000, but so far nothing for the XEs.
Re: APX6000/6000XE housing colors
There are no other colors for the XEs
Re: APX6000/6000XE housing colors
Bummer - it would have been nice to have some additional options for color-coding them.
-
- Posts: 148
- Joined: Mon May 26, 2014 4:55 pm
- What radios do you own?: MOTOROLA APX 7000 AND APX 6000
Re: APX6000/6000XE housing colors
I actually saw a pink apx 6000. Pretty sure it was custom and not factory. I didnt ask though.
Re: APX6000/6000XE housing colors
Tom Can you provide the numbers that you foundTomSlick wrote:Can anyone confirm the actual availability of housing colors other than black, green and yellow for the 6000XE? I've found part numbers for red, blue and orange for the regular 6000, but so far nothing for the XEs.
-
- New User
- Posts: 6
- Joined: Thu Mar 20, 2014 7:22 pm
- What radios do you own?: XTS5K, XPR7ks, XPR5Ks, CDM1550
Re: APX6000/6000XE housing colors
Will the Coyote Tan case for the SRX2200 fit on an APX6000?
Re: APX6000/6000XE housing colors
Sorry for the delay in responding - if you look at Wiscomm, for example, you can see non-XE housing kits in red, orange and blue:pfd radio wrote:Tom Can you provide the numbers that you found
http://shopwiscomm.com/APX6000-Parts-C270810.aspx
They are in the "NHN707xAS" range.
Re: APX6000/6000XE housing colors
I'll let everyone in on a little secret.. Unlike the APX7000XE which uses a different housing shell then the standard APX7000, the APX6000 & APX6000XE use the same housing shell. The top control of the APX6000XE drops down a little on the sides to fill in the gap. So you can use the standard colored APX6000 housing shells on an APX6000XE.
Here is a comparison photo of a couple of my radios, APX6000 & APX6000XE.
Here is a comparison photo of a couple of my radios, APX6000 & APX6000XE.
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
Re: APX6000/6000XE housing colors
Thanks, that's good to know.Mfire39 wrote:I'll let everyone in on a little secret.. Unlike the APX7000XE which uses a different housing shell then the standard APX7000, the APX6000 & APX6000XE use the same housing shell.
I'm wondering if anyone can speak to availability of the various housing colors. For example, radioparts.com shows at least one (orange, I think) as 'discontinued'.
-
- New User
- Posts: 8
- Joined: Thu Dec 24, 2015 1:00 pm
- What radios do you own?: xts3000, xts2500, mts2000
Re: APX6000/6000XE housing colors
To change the housing, what special tools if any do you need?
- mikegilbert
- Posts: 657
- Joined: Thu Nov 14, 2002 12:08 am
- What radios do you own?: All of them
Re: APX6000/6000XE housing colors
You'll need a Torx T8 bit to remove the six screws which hold the housing to the chassis.PATHman89 wrote:To change the housing, what special tools if any do you need?
1. Remove the battery
2. Remove the accessory connector cover
3. Remove the two screws in the middle of the radio which hold the speaker grille in
4. Lift speaker grille away to reveal two screws underneath
5. Remove the top two screws above the speaker. Be careful not to let the speaker fall out
6. Remove the bottom two screws below the serial label
7. Carefully pull the sides of the housing away from the chassis and remove cover
8. Reassemble
Voila!
Re: APX6000/6000XE housing colors
The three-piece setup on the 6000's makes is a HELL of a lot easier than the 7000 single-shell design.mikegilbert wrote:You'll need a Torx T8 bit to remove the six screws which hold the housing to the chassis.PATHman89 wrote:To change the housing, what special tools if any do you need?
1. Remove the battery
2. Remove the accessory connector cover
3. Remove the two screws in the middle of the radio which hold the speaker grille in
4. Lift speaker grille away to reveal two screws underneath
5. Remove the top two screws above the speaker. Be careful not to let the speaker fall out
6. Remove the bottom two screws below the serial label
7. Carefully pull the sides of the housing away from the chassis and remove cover
8. Reassemble
Voila!
Re: APX6000/6000XE housing colors
Yes, it should. I have Coyote furniture on my APX8000, which is based on the APX6000, and it fits perfect.F800 wrote:Will the Coyote Tan case for the SRX2200 fit on an APX6000?
-
- Posts: 96
- Joined: Wed Aug 28, 2002 7:56 pm
- What radios do you own?: XTL, XTS, Saber, Spectra, MTS2
Re: APX6000/6000XE housing colors
We use various colors of heat shrink tubing on the antennas to help identify radio groups at a distance.
Dan
Dan
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: APX6000/6000XE housing colors
Is there a XE style speaker Grille part for the regular 6K?
Re: APX6000/6000XE housing colors
No...closest to that would be the 8000 (non-XE) speaker grille.motoapco25 wrote:Is there a XE style speaker Grille part for the regular 6K?