I have 4 800 MHz Quantar stations. 2 have repeat audio, 2 have no repeat audio. From a Smart Zone system, now need only conventional CTCSS operation. I was successful in read/reconfigure/write and have 2 working and 2 with no repeat audio. I realize these are a fairly complex beast, what information do I need to gather from the good/bad to even post a meaningful question regarding the 2 that don't pass audio in repeat mode.
Thank you.
Old School
Quantar 800 MHz, No Repeat Audio Analog
Moderator: Queue Moderator
-
- New User
- Posts: 2
- Joined: Fri Apr 07, 2017 1:38 pm
Re: Quantar 800 MHz, No Repeat Audio Analog
IIRC there is a small IC on the station control board that goes bad and causes this... Search around here for posts related to that.
- Astro Spectra
- Posts: 668
- Joined: Sat Sep 22, 2001 4:00 pm
Re: Quantar 800 MHz, No Repeat Audio Analog
Try www.P25.io if the SCM is a '4094.
Re: Quantar 800 MHz, No Repeat Audio Analog
Interesting website. Thanks for sharing that. It's nice to see that those critical repairs are documented somewhere.
-
- New User
- Posts: 2
- Joined: Fri Apr 07, 2017 1:38 pm
Re: Quantar 800 MHz, No Repeat Audio Analog
Thanks for the replies with excellent information, greatly appreciated. Phone book size manual on its way, lots to review.
Will advise findings when squared away.
Will advise findings when squared away.