Have a model 3.5 on the bench. Computer will recognize the usb cable and radio being plugged in but CPS will not read the radio. Says no radio found. Multiple other APX7000's/8000's read/write with no issues. Any ideas?
thanks.
APX7000 recognized but won't read/write
Moderator: Queue Moderator
-
- Posts: 413
- Joined: Mon Sep 17, 2007 3:48 pm
Re: APX7000 recognized but won't read/write
Any chance the target radio was fleet-programmed by a previous owner using a security ID button?
Karl - WA8NVW AFA5VB
SHARES + NCS
SHARES + NCS
-
- Posts: 413
- Joined: Mon Sep 17, 2007 3:48 pm
Re: APX7000 recognized but won't read/write
Unknown about that but quite possible now that I think of it. Would there be an error in the CPS or would I just get the "Could not locate radio connected to usb?
Thanks!
Thanks!
-
- Posts: 413
- Joined: Mon Sep 17, 2007 3:48 pm
Re: APX7000 recognized but won't read/write
Found the issue. For some reason when I plugged in that particular unit it wouldn't work properly as a network device like it should have. I had to right click on the connection and enable. I've never seen an APX "disable" the network when plugging it in. Thanks!