I have a Motorola MTR3000 I have acquired-It is a MTR2000 Converted to a MTR3000-I have Used HDX Hex Edit and it works on hex Convert-As soon as I try and load Converted Code plug the repeater rejects and says hardware does not support the freq range and will not let me program?
I have converted XPR8380 and XPR6580 to Ham freq 900 MHZ with no problem. I can not get this MTR3000 to go to ham freq?, Do I need special software? My freqs are 927.9125TX/902.9125RX. Thanks for all the help with my project here in Las Vegas, NV
MTR3000 On 900MHZ ham band-Need Help?
Moderator: Queue Moderator
-
sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: MTR3000 On 900MHZ ham band-Need Help?
Did you have any luck with this?
-
BigJoeW
- New User
- Posts: 3
- Joined: Sat Jan 30, 2010 2:32 pm
- What radios do you own?: Saber, Spectra, P1225, GM1225
Re: MTR3000 On 900MHZ ham band-Need Help?
I know I’m a little late to the thread- but also seeking a solution here as well. Following at the least!
-
sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: MTR3000 On 900MHZ ham band-Need Help?
nope, :o don't work
Re: MTR3000 On 900MHZ ham band-Need Help?
Just curious, do both rx and tx error when trying out of band? I know the mtr2000 uses a resistor array in the pa to determine band, it may be the same with the 3000.
-
sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
Re: MTR3000 On 900MHZ ham band-Need Help?
You can't write the freqs to the radio. It bounces. No one I know has gotten this to work.