Hello Guys
We have a few Console/ Deskset Hubs, that go to Deskset phone type radios.
they connect to the Smart Rib on the MCS2000, they are steerable to change the channel.
We would like to replace the MCS2000 with an APX6500 if possible.
We don't really need steering for channel changing, it usually stays on one channel.
Is there a cable made to go to the D ring or Aux Connector of the APX 6500?
XTL should have the same Aux Connector.
Or if we cut the cable and run it to the pinout for the Aux Connector, has anyone had success?
Thank you,
Martin Pace
Utah County Telecomm
Console/ Deskset Cable
Moderator: Queue Moderator
Forum rules
Share your enhancements here! What is not permitted is the discussion regarding adding features (aka flash options) which you can still purchase from Motorola for current subscriber products including discussion regarding Depot on current products.
Share your enhancements here! What is not permitted is the discussion regarding adding features (aka flash options) which you can still purchase from Motorola for current subscriber products including discussion regarding Depot on current products.
-
pacemartin@yahoo.com
- New User
- Posts: 1
- Joined: Tue Sep 12, 2023 8:07 am