The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
Does anyone know what Spectra Error Code 17/10 means. I can't find it on the list. When first turned on the display shows ER 17/10, and then it goes away. This is an 800 C7 Spectra, model D45KGA5JC7AK.
completely unrelated.....do you know of a reason I can't get at your website from RoadRunner? I can access it anywhere but from RR as my ISP at home. Did you ever have the same problem?
Do not make Sig angry...he'll just keep ringing the bell.
Do you have it configured as a trunk mount? I had the same problem with a trunk mount 800 C7. I shorted two pins on the back of the radio and the problem was solved. I was using the front cable connector for the speaker instead of using the 15 pin on the back of the radio. So once I figured out the pins I needed to short all was well.
I think that even after disabling everything in RSS, I was still getting the error. Hope this helps...
It is configured as a trunk mount and after shutting it off in the software, I still get the error. Do you know which 2 pins to short? The radio does work fine after the error code goes away.
I figured this out in the software, so for future reference if anybody needs it you read the radio then go to F2 / Radio Wide, then F9 / Other Options, then F3 / Data options and on the bottom of that screen disable the Serial Data.
I grounded pins 2 and 8 on the radio itself and used the 15 pin connector plugged into the remote cable. It quit having the error. I think it has something to do with the remote emergency button. On the remote mount, there is suppose to be a remote emergency switch. Pins 2 and 8 are for that switch, so if you ground them out, you'll be set. I hope it works for you,