Is it possible to have a CP too big in AS3?

otter9309 · Post by **otter9309** » Mon May 26, 2003 12:46 pm

I have a full feature AS3 and recently tried to load a large codeplug 205ch and radio gave me a 01/82 fail. After removing some of the ch's radio kicked ass again. Give me your thoughts.

Thanks
Steve

Post by Pj » Mon May 26, 2003 3:00 pm

I don't have either of mine all filled up, but someone mentioned (I never looked it all up) that each time you create a zone, you lose a channel. Could this be part of the problem?

As long as the RSS doesn't complain, I don't know why the radio is complaining unless there is an issue with it.

MRFLASHPORT · Post by **MRFLASHPORT** » Mon May 26, 2003 6:35 pm

otter9309

Your flashcode probably has options open that you don't use and your codeplug was too big.

Had the same thing happen to my buddies XTS3500. I reprogramed the radio with a codeplug that had the same flashcode and had to start all over again.

what a pain that was!

Twisted_Pear · Post by **Twisted_Pear** » Thu May 29, 2003 4:28 pm

I have an ASTRO Spectra with a whored out flashcode. It has 200+ freqs in it and sometimes fails programming with the radio displaying FL 01/82, or something like that. I just reprogram and all is well.

So I think when you have a bloated flashcode it's quite possible.

-Wayne

Dale Earnhardt · Post by **Dale Earnhardt** » Thu May 29, 2003 11:14 pm

just remember dont put all those extra things like phone numbers, status messages and stuff like that, it makes alot of diffrence