CPS 3.0 System Key changes ?

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
Singletone
Posts: 4
Joined: Thu Aug 07, 2003 8:56 am

CPS 3.0 System Key changes ?

Post by Singletone »

Folks - I went from RSS 9.x to CPS3.0 and everything seemed fine until I tried to modify some trunking personalities in several AS's and XTS3K's, closer inspection revealed that CPS says "missing or invalid system key".
Fine, all my keys are exactly those that I hauled over from the RSS setup, and they worked fine there. If I take any key which is in the CPS key dir (CPS is set to point to the key file dir correctly) and fire up RSS, no problem.

I have not blown a codeplug in to any units as there's no going back from CPS once done, but really.. I talked with MOT support and they said the sysXXXX.key file format had not changed between RSS and CPS.

Tried importing using Import->... same thing.

Anyone else seen this deviant behavior ? I guess it's another reason to stay with RSS, of course _after_ I spent $379 with Auntie M.
RKG
Posts: 2629
Joined: Mon Dec 10, 2001 4:00 pm

Post by RKG »

I have not had that experience; keys transported from RSS to CPS work just fine. Are you REALLY sure that you have configured the CPS to point to the directory in which the keys are contained? (I find the CPS more difficult to configure than the RSS.)
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

No CPS system key issues here, in any of them (Astro/Spectra/XTS2500/5000/MCS/MTS/MTX850). Motorola is correct in stating the system key format is unchanged. Not that it helps you, but that's the first I've heard of that issue.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
xmo
Moderator
Posts: 2549
Joined: Fri Oct 12, 2001 4:00 pm

Post by xmo »

"..all my keys are exactly those that I hauled over from the RSS setup.."
--------------------------------------------------------------------------------------

The operative question is - are the keys you have "official" keys from Motorola - or were they generated in the field somehow?
Singletone
Posts: 4
Joined: Thu Aug 07, 2003 8:56 am

fixed it

Post by Singletone »

Interesting. Pulled another codeplug from another XTS and CPS was happy, system keys work fine in terms of programming, did this with several other units.

Hmm, so it seems that CPS, when disassembling the codeplug from the XTS in question, silently determined that there was a problem with the image and therefore would not load a system key for this image. Rather than give a more direct error message about a problem with the image, it instead refused to swallow a system key against this image. Subtle but frustrating, as the radio operates with no error codes or bugs.
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”