Batboard

If anybody is interested in increasing the talkgroup scan list from 10 to 15 talkgroups edit patport.exe offset 00903271 and change from 0A to 0F

Enjoy

Great work, thanks!! What happens if you try a value greater then 0F?

tried it and it doesnt work, 15 is the max

i have tryed it and it does not seem to work

How about older versions like CPS 14, do you have a list of several of the HEX values before and after the 0A ?

I'm wondering if I could find the same HEX value in version 14 and try it ?

I don't have any need to upgrade above Vs 14 now, hence the need for some more search info.


Mike

newtomotorola wrote:If anybody is interested in increasing the talkgroup scan list from 10 to 15 talkgroups edit patport.exe offset 00903271 and change from 0A to 0F

Enjoy

Do you know the offset for patmob?

freerider aust wrote:i have tryed it and it does not seem to work

be sure to add a new scan list it wont increase your current ones.

tvsjr wrote:

newtomotorola wrote:If anybody is interested in increasing the talkgroup scan list from 10 to 15 talkgroups edit patport.exe offset 00903271 and change from 0A to 0F

Enjoy

Do you know the offset for patmob?

Sorry dont have patmob

I also have not upgraded past 14 and I checked, it does not have the same offset number. It might be in a different place, but who knows where.

mike m wrote:How about older versions like CPS 14, do you have a list of several of the HEX values before and after the 0A ?

I'm wondering if I could find the same HEX value in version 14 and try it ?

I don't have any need to upgrade above Vs 14 now, hence the need for some more search info.


Mike

I don't know if this is a strange result or not, but my Priority Monitor list now goes to 15 but if it is just Talkgroup scan it is still at 10 members.....?

What version hex editor was used?

I used v6.6.1.5158

newtomotorola wrote:

freerider aust wrote:i have tryed it and it does not seem to work

be sure to add a new scan list it wont increase your current ones.

guess what it does work if you add a scan group
thank for that mod !!

So does anyone have some of the hex values before and after the 0A so others can search in older versions of CPS ?

I figure 4 hex values before and 4 after the correct 0A address will help in locating the correct address in older versions should do it.

Mike

Never mind I got it to work on CPS Vs 14.01.00 just fine thanks for doing the good work.

A big txs to Jim, N7MAQ for all the help, it worked great Jim.

Mike

newtomotorola wrote:If anybody is interested in increasing the talkgroup scan list from 10 to 15 talkgroups edit patport.exe offset 00903271 and change from 0A to 0F

Enjoy

Would be interesting to find a way increasing the number of conventional channels in a scan list. 15 are not very much How did you find the location in the file?

you can max it out, its a pain as you have to move other things to allow.

for fun change 0A or 0F to 7F. no mod require. You will then start to understand

newtomotorola wrote:If anybody is interested in increasing the talkgroup scan list from 10 to 15 talkgroups edit patport.exe offset 00903271 and change from 0A to 0F

Enjoy

Hey this is great! Just wondering where you got the information from? Can you cite your source?

EindhovenOne wrote:I don't know if this is a strange result or not, but my Priority Monitor list now goes to 15 but if it is just Talkgroup scan it is still at 10 members.....?

Anyone have any suggestions? Having Priority Monitor bumped to 15 is nice but I would like to get the Talkgroup to 15 as well...

I know this is a bit OT but has anyone figured this out for MCS and MTS CPS R02.03.00?

These guys did,
http://www.p25.ca/threads/101-HOWTO-15- ... 00-MTS2000

SWEET!! ive been looking for it too..

N6LAU wrote:I know this is a bit OT but has anyone figured this out for MCS and MTS CPS R02.03.00?

this come from that other forum i have tryed it and it works on mcs 2000r02.03.00
Address: 0x00580A90
Value: Change 0A to 0F.