XPR5550/5350 Hum on Transmit
Posted: Thu Apr 05, 2012 6:50 am
Anyone else noticed the radios transmit a hum on analog channels???
Looks like you need to open another case with Motorola, Jeff. Radios must have forgot the words since they were shipped out of Elgin......escomm wrote:Anyone else noticed the radios transmit a hum on analog channels???
EDITED for space...Resolved issues in R02.04.00 product release
Resolved issues are the known product problems that were reported in products releases, but have now been fixed or closed.
Issue Number
Product / Version Found
Impact Description CCMPD01635369 2.00.00 Humming sound on analog channels of MOTOTRBO 2.0 mobiles
CCMPD01576056
2.00.00
When the Channel Dial Feature is enabled and the Channel is changed from the Home screen, the radio will power up on the previously used channel rather than the Channel set from Home screen after the next Radio Power cycle. CCMPD01582326 2.00.00 The Mobile Numeric Display Radio LED used to indicate Channel Change mode may blink at a faster than usual rate when a Call is received concurrently with a Channel Mode change. When radio user presses the dual Volume/Channel knob on the Numeric Mobile to change the channel, the 7 Segment LED will blink to indicate that the radio is in Channel Change mode. If then at the same time the radio receives a call, the blinking rate of the 7 Segment LED will become faster. After the 10 second channel change mode timer times out or the call ends, the 7 Segment LED will return to the normal blinking rate.
CCMPD01559839
2.00.00
If the selective call hang timer is selected to zero (invalid configuration), then the radio's menu response will freeze. CCMPD01580885 2.00.00 Radio is able to key up >60 seconds even when codeplug Time-out-timer equals 60 seconds
CCMPD01583282
2.00.00
Incoming call makes screen freeze when VOX is ON
CCMPD01584780
2.00.00
Unable to decrease volume level when SJ board is attached to the radio
CCMPD01593262
2.00.00
Radio does not unmute on silent emergency with voice mode