Batboard

CDM1250

There is an È at the beginning of the model number and I can't clone
anything over it because it reports a model number mismatch!



If the Pic doesn't work you can link directly:

https://www.dropbox.com/s/0jcty2abhv05t ... oerror.PNG

Never seen that before, that's actually too many digits for a model number now. what does the model number say on the back of the radio? What happens if you don't try to clone, just reat that radio and alter something then try to write back to it?

The radio have checksum error.
So it can't clone.
Use latest cps to fix this problem.

Or use waris labtool to do job.