Batboard

R-2001D Basic Model
R.2001D/HS With high stability oscillator
R.2002D With IEEE-488 option
R.2002D/HS High stability oscillator and IEEE-466 Bua option
R-2004D With Motorola DES option
R-2004D/HS High stability oscillator and Motorola DES option
R-2005D With Motorola SECURENET option
R.2005D/HS High stability oscillator and Motorola SECURENET
option
R.2008D With cellular option
R.2008D/HS High stability oscillator and cellular option
R-2009D With IEEE-488 Bus and cellular options
R.2009D/HS With high stability oscillator, IEEE-488 Bus and cellular
option
R.2010D With UK cellular option
R.2010D/HS High stability oscillator and UK cellular option
R.2011D With IEEE-488 Bus and UK cellular option
R.2011D/HS High stability oscillator, IEEE-488 Bus, and UK cellular
option
R-2021 D With Motorola Trunked Radio option
R-2021D/HS High stability oscillator and Motorola Trunked Radio
option
R-2045D With Motorola DES and SECURENET options
R-2045D/HS High stability oscillator and Motorola's DES
and SECURENET options
NOTE: Factory set 220 Volt models are also available. Add "/220"
to model number.

Optional Accessories
RTP-1002A Battery Pack
RTL-4056B Protective Canvas Cover
RTL-4065A Transit Case
RTL-4075A RF Detector Probe
RTA-4000A Telescoping Antenna

• 0 Master Reset
  10 Encode/Decode
  11 Encode/Decode
  12 Encode/Decode
  13 Encode/Decode
  20 Monitor
  21 Monitor
  22 Monitor
  23 Monitor
  24 Monitor
  25 Monitor
  26 Monitor
  30 Frequency
  31 Frequency
  32 Frequency
  33XY Frequency
  3300 Frequency
  34XY Frequency
  3400 Frequency
  Clears all special functions
  (default state)
  Clears all IX E/D special
  functions (default state)
  Baseband
  Decode only
  Encode Only
  Clears all 2X monitor
  special functions (default
  state)
  Enables 300 Hz LPFL
  Enables 3 KHz LPFL
  Enables 20 KHz LPFL
  Enables 5 Hz HPFL
  Enables 300 Hz HPFL
  Enables 3 KHz HPFL
  Clears all frequency 3X
  special functions (default
  state)
  Enables direct frequency
  readout (10 Hz resolution)
  Enables direct frequency
  readout (1 Hz resolution)
  Enables scan lock from
  XOO MHz to YOO MHz
  Enables full-band
  scan lock
  Enables scan latch from
  XOO MHz to YOO MHz
  Enables full-band scan
  latch
  CODE MODE ACTIVATES
  Enables automatic
  DVM ranging (default
  state)
  40
  41
  42
  43
  44
  50
  51
  52
  60
  61
  62
  63
  64
  65
  70
  71
  72
  73
  DVM
  DVM
  DVM
  DVM
  DVM
  Enables 1.0 V DVM range
  Enables 10 V DVM range
  Enables 100V DVM range
  Enables 300V DVM range
  Modulation Meter Enables automatic
  modulation ranging
  (default state)
  Modulation Meter Enables 10 KHz range
  Modulation Meter Enables 100 KHz range
  Auto counter resolution
  (default state)
  Counter
  Counter
  Counter
  Counter
  Counter
  Counter
  System Control
  System Control
  System Control
  System Control
  0.1 Hz resolution
  1 Hz resolution
  10 Hz resolution
  100 Hz resolution
  1 KHz resolution
  Sets factory control states
  (default state)
  Sets the current state
  as the power-on state
  Initiates a system self test
  Disables the automatic
  switching to monitor mode
  if the input signal is over
  0.1.W.
  74 Mutes speaker during GEN
  77XY
  7700
  78XYZ
  78000
  79
  99
  System Control
  System Control
  System Control
  System Control
  System Control
  System Control
  Sets the last XY in RF
  memory presets as duplex
  Resets from duplex to
  simplex (default state)
  Sets deviation audible
  alarm to XY.Z KHz
  Disables audible alarm
  (default state)
  Resets nonvolatile memory
  Software Version Shows P/N of resident
  software version

Sorry, but no matter how I use the above codes, I can not make this list show up the way I need it, so the data makes sense.
Email me if interested, and I will send that way.

Thanks Earnest, That makes sense with what I have. I know about all the special functions too.

Dave
2005D

R.2024D/HS With high stability oscillator, IEEE-488 Bus, SECURENET options DES, DES-XL, DVP, DVP-XL