SM50 For APRS

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
williamray507
Posts: 51
Joined: Mon May 02, 2005 6:12 am

SM50 For APRS

Post by williamray507 »

Hello everyone, I have a TinyTrak3, SM50 and the cable to connect the two. What i need is the SM50.mdf file for the programming software that is already hex edited. And if you could help me out with what settings in the RSS need changed to allow the COR signal to output to PIN8 I would be very grateful.

Thanks,
Bill
K3AVN
WQRG512
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”