Page 1 of 1
XPR6580 Programming ERROR
Posted: Sat Dec 20, 2014 12:24 pm
by 35-K9-1
I am trying to program an XPR6580 and when I get try to input certain frequencies, I get an Error #1224 message. It says that it requires the Canada Full Frequency Range feature. Any help with this?? Thanks.
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 10:45 am
by escomm
Motorola does not want NPSPAC frequencies in the XPR6580.
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 12:13 pm
by 35-K9-1
Okay. Thanks Jeff.
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 1:29 pm
by escomm
BTW what CPS version are you using and is it the digital flash or the trunking flash? Motorola made a booboo with the trunking flash and it would allow NPSPAC frequencies and it wasn't fixed til 10.7 CPS IIRC............
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 8:19 pm
by N4KVE
You can always contact a friendly dealer in Canada to ask for the EID. GARY
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 9:04 pm
by 35-K9-1
I'm using Version 10 build 5.
Re: XPR6580 Programming ERROR
Posted: Sun Dec 21, 2014 9:25 pm
by escomm
If you are not using it for DMR and you don't need it out of band for ham 900mhz you should be able to flash it to the SZ flash and enter the NPSPAC frequencies