Page 1 of 1

APX7000 Vs. XTS5000 On Encrypted P25 Channel

Posted: Mon Aug 03, 2015 2:37 pm
by Jim1348
I have one P25 conventional channel programmed in my scan list on both an APX7000 and an XTS5000. I do not have encryption on either transceiver. The P25 channel has both encrypted and unencrypted traffic on it. On the XTS5000, I hear the noise when receiving an encrypted transmission. On the APX7000, it mutes the noise when receiving an encrypted transmission, which is what I prefer. If there a setting on the XTS5000 to mute encrypted P25 traffic?

Re: APX7000 Vs. XTS5000 On Encrypted P25 Channel

Posted: Mon Aug 03, 2015 3:05 pm
by N4DES
You probably have the XTS5K set for Digital Carrier Squelch in the personality which is why you are hearing it.

APX7000 Vs. XTS5000 On Encrypted P25 Channel

Posted: Mon Aug 03, 2015 5:28 pm
by Jim1348
Actually, no I don't. That is one of the first I thought of. So, the two units should behave the same then? I will go and double check that, though. Maybe I missed it somehow.