Batboard

I have an XTL 5000 Hi power remote mount with an 05 head and I want to convert it to an 03 head.
My question is what cable do I need to conn the speaker and ign sense lead?
or I can make my own if someone could tell me what the pin out is on the
DB 25 acc conn.
Any help would be much appreciated
Jim

http://www.ebay.com/itm/OEM-Motorola-HL ... 1536065719

This is what I used when I had the 03 head.

HLN6863

Not sure what radio you have but mine is a remote mount hi power, it uses a O TYPE TIB , the acc conn is a DB 25 located on the front of the radio.
since I first posted I located a pin out and made my own cable. The spk is on pins 25 and 24 and I don't use a sen. lead, instead I set the code plug
setting to blank and turn the radio on and off manually.