Batboard

Looking for MTS2000 800Mhz SREC model number H01UCF6PW1BN
Thankyou

Has anyone visited the toolproof issue with the MTS2000 lately ? The only serious work I can find is with Monty back on 04. RIP brother.

I found 800mhz codeplugs on the codeplug super site: http://codeplugsupersite.com/
Don't know if their in s-rec format or not.

Why not just change out the controller board?

spectragod are you saying just get another mts2000 controller ? How is that going to work ? Even if you have a good s-record it will still be out of tune with your existing hardware. What controller do you suggest ?

saberjerk wrote:spectragod are you saying just get another mts2000 controller ? How is that going to work ? Even if you have a good s-record it will still be out of tune with your existing hardware. What controller do you suggest ?

If you dump an s record in, it will be out of tune also. Find a controller with the flash and model # you need, change it out and your done, sans a tune possibly.

I'm pretty sure that if you just dump in any old srec you will get toolproof error. You have to save the original and guard it with your life.
No one here seems to be interested in these radios and their problems anymore. Their afraid of ol ma M !!

saberjerk wrote:I'm pretty sure that if you just dump in any old srec you will get toolproof error. You have to save the original and guard it with your life.
No one here seems to be interested in these radios and their problems anymore. Their afraid of ol ma M !!

It would depend on the FW that is in the radio if it will tool proof it. Mother m gave me a tool to use when we rebanded to un tool proof those radios, I think I used it 3 or 4 times, I'll have to dig it out to see what it was called.

Hi SG,

If you can find the tool to undo the FAIL 01/93 error on an MTS2000 we need to talk. I believe I have a radio that needs this.

Thanks, BJ