Batboard

Out of curiosity just wondering if anyone knows whether this model "with or without"
modification will accurately work in the ham 1295Mhz spectrum area?

According to the Bird manual, 25-1000 Mhz: see here - http://birdrf.com/~/media/Bird/Files/PD ... meter.ashx

I am well aware of the specs hence my question and am hoping for someone with first hand experience
above 1Gz since 23cm is not that far out of spec.

I have used my Bird 43 with a 400-1000Mhz slug to take relative measurements on the 1.2Ghz ham band. For example, measuring forward and reverse power readings to calculate SWR for a coax/antenna setup on my truck. I am sure that the readings were off a bit, but since both forward & reverse were probably off by the same amount, it worked fine.

Never used a 4304A though, sorry.

I have a Bird 43 with the correct elements but have two vehicles(personal and work) and am out and about
with the work vehicle more often and will probably acquire a 4304A for the work vehicle hence my question.
My having a 1.2Ghz repeater i contemplate the need to have to make due with the 4304A for this reason.