Batboard

I have a 25W VHF MCS2000 M3 and it is set for ignition sense. Where in the CPS can I remove this and have it power on with the front button? Thanks

Radio Configuration -> Radio Wide - > Advanced -> Ignition Switch

wcu02mpa wrote:I have a 25W VHF MCS2000 M3 and it is set for ignition sense. Where in the CPS can I remove this and have it power on with the front button? Thanks

I could be wrong, but in the other models regardless of the ignition sense, I believe that if you hold the power on button, it will power up. I don't have that much time behind playing with the MCS2000, so I would have to go play with one to be sure.

Jim

Jim202 wrote:

wcu02mpa wrote:I have a 25W VHF MCS2000 M3 and it is set for ignition sense. Where in the CPS can I remove this and have it power on with the front button? Thanks

I could be wrong, but in the other models regardless of the ignition sense, I believe that if you hold the power on button, it will power up. I don't have that much time behind playing with the MCS2000, so I would have to go play with one to be sure.

Jim

Yes - this is true Jim. regardless of how the ignition sense is configured the power on button will always work.