I have a customer with XPR6550 and XPR7550 radios. When they attach a surv kit to the side of the radio the audio will spike very loud for no apparent reason at times. Wondering if someone could point me in the right direction to fix this for the customer. Would this be in the audio settings of the radio??
John
audio spikes
Moderator: Queue Moderator
-
- Posts: 229
- Joined: Thu Jul 22, 2004 8:27 am
Re: audio spikes
What do you mean by spikes? Is it on RX or TX? Is it always at "that" level, or is it different at different times? Are these surv kits Motorola units (digital certified) or aftermarket units?
-
- Posts: 229
- Joined: Thu Jul 22, 2004 8:27 am
Re: audio spikes
It is on the receive side. When someone is talking to the receiving radios the audio will spike meaning going from low to full volume hurting peoples ears. The surv kits are from impact radio
John
John
Re: audio spikes
I have two questions. Where is the volume control on the radio set? This is going to set the RX audio level going to the accessory devices?johnny1225 wrote:It is on the receive side. When someone is talking to the receiving radios the audio will spike meaning going from low to full volume hurting peoples ears. The surv kits are from impact radio
John
My second question, is the connector pins clean on both the radio and the accessory connection point? Do not use a pencil eraser on the pins as these are gold plated and if you take off the plating, you will have way more problems than what you have now. These connections need to be clean and tight. Do not over tighten the retaining screw or you will create additional problems.
Jim
Re: audio spikes
I have a customer complaining of the same issue (spiking RX audio) using Peltor headsets. It's operating on a Cap+ UHF repeater. We have been unable to duplicate it in shop. This is on a XPR7550e radio.
Re: audio spikes
We've got a mix of Gen1 and Gen2 Trbo radios on our system. We would get RX spikes on the Gen2 radios intermittently when a Gen1 radio would key up. Audio was much better when we upgraded everything to the latest fw. If you can just get the Gen1 radios on version 1.12 things should improve.