CDM 1550LS+ UHF No PL/DPL on transmit
Posted: Sun Nov 05, 2023 3:58 pm
This 1550 was working correctly until I upgraded the firmware to the latest firmware from Motorola. On a channel that uses PL the receiver decodes correctly. There is NO PL transmit. I have checked the code plug and there is the correct PL in both the Rx & Tx.
I saved the code plug before I upgraded it. Code plug was dumped into the radio with no issues.
I have searched the Internet without finding an answer as to what maybe causing it.
Jim, K8COP
I saved the code plug before I upgraded it. Code plug was dumped into the radio with no issues.
I have searched the Internet without finding an answer as to what maybe causing it.
Jim, K8COP