Batboard

Hello, I come to you because I have ******** APX6000 VHF, I managed to read the codeplug, I made modifications in it and when I want to reprogram it I have this error



I am working with version R34.00.00 of the CPS, and I am in version see photo for the firmware



if you have an idea because I'm stuck thanks in advance

Why don’t you translate what the explanation was into English? Something about the advanced system key? GARY

traduction

Permission denied, Attempt to write to a write-protected radio without the authorized advanced system key loaded and connected

Hello, thank you for the clear information, is there a solution by flashing the radio, or something else to solve the problem, because I can read it without problem

denis wrote: ↑Tue Dec 10, 2024 2:34 pm Hello, thank you for the clear information, is there a solution by flashing the radio, or something else to solve the problem, because I can read it without problem

Remove this feature from your flash code. You’ll need “special software” for that. GARY

ADVANCED SYSTEM KEY
HARDWARE KEY
Provides the highest security for programming an APX radio onto an
ASTRO 25 system by requiring a hardware-based Advanced System Key to be present in the CPS upon programming. This restricts legacy software keys from being used to program any system on the radio.
When the radio is ordered with this option the customer must provide a System ID that will be set in the radio and is known as the Owner System ID. For flexibility purposes, the Owner System ID ASK can be used to disable the hardware restriction, thereby supporting legacy software keys.
Hardware-based Advanced System Keys are more secure since they cannot be electronically shared, they cannot be copied due to unique serial numbers, they can be set to expire, and they can be setup limits and ranges for some system fields like Unit and Talkgroup IDs.
PORTABLES
QA01648
MOBILES
QA01648

Hello, thank you for your response, the flash code is

9Q108g-G11490-1-000000-000000

so we have to delete QA01648 and Q498 I guess
thank you very much

denis wrote: ↑Fri Dec 13, 2024 10:24 am Hello, thank you for your response, the flash code is

9Q108g-G11490-1-000000-000000

so we have to delete QA01648 and Q498 I guess
thank you very much

You can leave the Q498, but when you remove the QA01648, you must replace it with QA01749. Then you’ll be set. GARY.