Hello all,
I want to know how I must programm the Astro, to send the "Select 5 tones", or 5 tone call via Keypad. Which parameters do I have to activate in the software?
I want to enter the five different tones via keypad (like 85201), and then i want to send it out.
Greetings
AndreasP
Select 5 with Astro Saber III
Moderator: Queue Moderator
SELECT v TONES
The radio you have unfortunately does not suport Select 5 tone signalling method.
Chef
Chef
EDACS - Every Day Another Customer Screams...So a few al-Qaeda tourists got locked without a trial in Camp X-ray? Pass the
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
select v
It might however do Modat, depending on your flashcode and if IMBE of VSELP.
Modat is the LAPD, "cops" tv show sound. You might have been referring to that noise?
Good luck.
Modat is the LAPD, "cops" tv show sound. You might have been referring to that noise?
Good luck.
EDACS - Every Day Another Customer Screams...So a few al-Qaeda tourists got locked without a trial in Camp X-ray? Pass the
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
Chefa is correct. "Select 5" is essentially the European version of MDC1200. Not that they are compatible in any way, shape, or form...but it's what they use over there to accomplish the same things. The AS III won't do it, period. Unless there's a European version of the AS III (like the MX1000 to the Saber) that you could jam a codeplug of into...that might work.
Todd
Todd
SELECT V
While we're onthe topic of select-v here, Just in case anyone is not aware-
If you play with the options in the GM300, select ZVEI and custom set the tone(s) and lengths, then you esentially have a radio that does Modat, although it's not exactly the same sound.
It was quite funt o experiment with, I must have made dozens of variations to the setup screens in there one day and programmed the radio over 10 times to hear differnt combinations.
Something to do in your spare time @ the bench if you're bored.
Chef
If you play with the options in the GM300, select ZVEI and custom set the tone(s) and lengths, then you esentially have a radio that does Modat, although it's not exactly the same sound.
It was quite funt o experiment with, I must have made dozens of variations to the setup screens in there one day and programmed the radio over 10 times to hear differnt combinations.
Something to do in your spare time @ the bench if you're bored.
Chef
EDACS - Every Day Another Customer Screams...So a few al-Qaeda tourists got locked without a trial in Camp X-ray? Pass the
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
Kleenex...BOO, HOO, HOO.....AMERICA Should have turned a large chunk of the world into a parking lot.
Hello all
Thanks for your messeges, but I have a other question:
Can I use the Keypad to select the channels directly? For example I have 20 Channels programmed, and I would like to hear the 18th channel. Can I programm the radio, that I enter the 18 on the keypad, and thats it?
Because, I would programm 100 Channels into the radio, I don´t want to use the zones. I want to use the keypad for the channel select.
Greetings
AndreasP
Thanks for your messeges, but I have a other question:
Can I use the Keypad to select the channels directly? For example I have 20 Channels programmed, and I would like to hear the 18th channel. Can I programm the radio, that I enter the 18 on the keypad, and thats it?
Because, I would programm 100 Channels into the radio, I don´t want to use the zones. I want to use the keypad for the channel select.
Greetings
AndreasP
