Batboard

I am an individual who is seeking a console in which to mount mobile radio equipment. I guess what I really need is a retail dealer who will sell me, an individual not associated with any company, what I want directly, preferably via the web.

I have read the many posts here on the subject of consoles, as well as visiting the web sites for many of the major console manufacturers, and it’s very clear that they aren’t set up to sell directly to individuals. Someone posted that Stewart Products would do direct factory sales. Maybe they will, but what they won’t do is return phone calls or answer e-mails. I can’t even get console dimensions or pricing information. The closest I can come right now is Gall’s, but I don’t particularly like their selections.

Any help would be greatly appreciated.

The console companies out there are....

Gambler Johnson (you can get some of their stuff on Sirennet.com)
Stewart Products http://www.stewartproducts.com
Havis Shields http://www.havis.com
Jotto Desk http://www.jottodesk.com (FYI I just had a not so good exerience with them. If you want PM me for details)

Those are the ones that I could think of off the top of my head but I'm sure there are others....

Me personally since they don't make consoles for the Lumina specifically I am in the process of building my own. Pictures of which will eventually make it to the "Vehicle Installs" section.

Consoles for a vehicle or consoles for desktop mounting?

For a 2002 Ford F-150 w/ factory console. Only about 12" of room between the front of the console and the dash.

Most of the companies above and http://www.gamberjohnson.com sell thru distrubtors. Many will also take phone calls from you and help out in getting the right parts. Also you should be able to get on the website and find the closest distrubitor. Shop around for the best price. When I was looking for one, prices went everywhere. When you do get all your part numbers for whoever you decide to get, try out http://www.sirennet.net or .com and they are very competitive.

JAYMZ wrote:Gambler Johnson

Gambler Johnson.... How interesting.

Try http://www.lund-industries.com. Ther are based in Wheeling, Illinois (suburb of Chicago). Their telephone is 847 459-1460. They will sell to an individual and do set ups on all types of police/fire vehicles.

well i have a Havis sheild in my truck works great if you want a Havis i can sell you one

alex wrote:

JAYMZ wrote:Gambler Johnson

Gambler Johnson.... How interesting.

What's so interesting? It's a typo....

I just used a Havis Shields standard 8" console in a 2003 F250 Superduty with the factory bench seat- Looks great!!

I would get the Havis Shields C 800 -11D. I am putting these in our new SUV's and Pickups. They are inexpensive and decent quality.

Brett

The Havis Shield C 800-11D is what I have my eye on, as I believe it will fit in my truck, it's not too big, etc.

Do these use the one piece C series faceplates, and, most importantly, where can I buy them?

K

The equipment brackets are equipment specific or there are generic brackets available (make sure you measure your equipment well). Most commercial radios are supported. The console includes up to three brackets and or spacers. Public Safety Central in Tampa is a Havis Dealer. Thier website is http://www.public-safety-equip.com. The Havis Shields price list in .pdf format has the info you will need to get the part numbers you need.The console should fit you will need to remove your heater duct to get a good mount. All of our fleet has split bench seats so I'm uncertain if the factroy console will interfere. If this is your first install take your time and heed the advice posted before on the board ( 4ga wire, ATO fuse block, 100A relay, etc.) This will ensure a lifetime of service and prevent a lot of frustration later.

Brett

We now use Havis Shields Exclusively and have become a dealer for them. You can't beat the price v/s quality. Prices are competive with GALLs and but I hate their consoles. Simply put, they are a PIA to install and an even bigger one to service after the fact.

We've also used Gamber J, Quality is Excellent as well, but quite pricey. Also tough for us to become a dealer so we went with Havis.

You are all forgetting "TROY" clearly the best and yes I sell them, own them and love them!!!!!!!!

Hey scanman-

'bout time you showed up again

Password doesn't work my a@@

Alex had to spend the better part of a day fixing the site to allow my password to work!! But, I'M back! Troys and all.

Havis-Shields is a stone's throw from me. It's amazing how they've grown over the years. I remember back when I used to pick up warning lights and parts from them back in the 80's, when they were a handful of folks working out of a converted auto shop. Now they are in a huge custom-built manufacturing and installation facility. It's not unusual to see tons of new vehicles in their storage yard waiting for outfitting.

Try this distributor:
http://www.pursuittechnology.com/
and ask about the Troy Products line of Consoles. Visit them at the below link.
http://www.troyproducts.com/

I bought a console from allenslaw.com

Hello!

I am an authorized dealer of Troy products Command Consoles, so if you need a console for your vehicle, go to http://www.coderedsecurity.com

We can fix you up with a new console and a no-holes-drilled floor mounting kit for the console.

Please email me if you have any questions about consoles or mounting options; Troy is simply the best in the industry.

-John[/b]

i love the havis Products they Work Great Look Awsome and Real Good price.

Conn state police have bine using them for a while. they sol off a bunch of old ones not too long ago at auction so there are tons of them used floating around, they went to wedg infront of the seat not the center console

i put a wedge in my 03 2500HD ontop of the cup holder works and looks great .

Plus havis a has a real good relationship with whelen

Troy products recently released a new line of consoles called the MC line. These consoles feature a sloped upper area for greater visibility, and the rest of the console is flat.

These consoles would work great in a truck or SUV and they can accomodate up to 22" of faceplates. Nothing looks more organized and professional than a troy console.




I have these consoles available ONLINE using a credit card through PayPal (http://www.coderedsecurity.com). Please do not hesitate to contact me for more information.

Thanks,

John Mesich

ok anyone think that a couple of locking armrest might work on my removable top wrangler to mount and secure 2 or more radios? I have been trying to figure this out. I want to come back to my jeep and have radios in it due to the fact I live in the urban area of st louis

Joe