Page 1 of 1

Posted: Wed Dec 05, 2001 11:32 pm
by Donnie5063
just wondering if it might be to fast. i have a 133mhz PC and a 486 and i was looking into getting a laptop. thanks for any info given

Posted: Wed Dec 05, 2001 11:39 pm
by Monty
Hi:

Although its been reported that some
pentiums and other computers running
faster than a 368-486-25 will work with
some Motorola Programs, take some advice
and stick with a slower speed reliable
computer. Also a suitable Prorgamming Factory
Rib box is not a bad idea either.

All it takes is " just one " time for the Radio to become corrupt, and you could be
out as much as 379.00 to have the radio
code plug restored. Should that happen, I am
always around to fix most of them....( Except
CDM/Pro Series ) at this time.

All in all, if your radio is Windows95 ( up )
compatable, you should be OK...If its a Older
Series Radio, stick with a older computer.

If you want to Program " All Of them" a good
486-25 is ideal.

Monty

Posted: Thu Dec 06, 2001 2:57 am
by raymond345
Most of the older radios will not work here.

Posted: Thu Dec 06, 2001 6:23 pm
by Mike B
If you want to program Syntor X 9000 radios take a look at the computer type and speed recommendation at this link (4th paragraph down):
http://www.open.org/~blenderm/syntorx/i ... #x9kprgprb

______
Mike B.
http://www.open.org/~blenderm/syntorx/