Is this flashcode and HOST/DSP any good?
Posted: Sat Apr 26, 2003 6:58 pm
This is an older software version obviously. Good, bad or? Its from a VHF AS III
SOFTWARE VERSION- 03.33.00.0.0 DSP- A05.01.04
F50301-8F0000-5
Q806/G806 IMBE / APCO-25 Digital Operation
H260 250 Modes on W3 and W4 (150 or 160 channels for MTS2000)
H14/G114 Digital ID Display
H15/H44 H15 is Astro Data / H44 is VRM500 for MCS2000 only
H101,G101,H169 Conventional Repeater Access (Analog Operation Only)(MDC1200 or Singletone)
H868/W969 Multikey Operation
H39 Selective Radio Inhibit
H40 RAC Software Option (Repeater Access, Single Tone)
H35/G48 Conventional Operation
H29 Single key Software Encryption Option
Q354 OTACS (Over The Air Channel Steering)
Q353 OTACR ((Over The Air Channel Reassignment)
Q352 Soft ID
Q351 MODAT Operation
SOFTWARE VERSION- 03.33.00.0.0 DSP- A05.01.04
F50301-8F0000-5
Q806/G806 IMBE / APCO-25 Digital Operation
H260 250 Modes on W3 and W4 (150 or 160 channels for MTS2000)
H14/G114 Digital ID Display
H15/H44 H15 is Astro Data / H44 is VRM500 for MCS2000 only
H101,G101,H169 Conventional Repeater Access (Analog Operation Only)(MDC1200 or Singletone)
H868/W969 Multikey Operation
H39 Selective Radio Inhibit
H40 RAC Software Option (Repeater Access, Single Tone)
H35/G48 Conventional Operation
H29 Single key Software Encryption Option
Q354 OTACS (Over The Air Channel Steering)
Q353 OTACR ((Over The Air Channel Reassignment)
Q352 Soft ID
Q351 MODAT Operation