Page 1 of 1
Motorola Type I trunked system
Posted: Wed Jun 11, 2003 2:05 pm
by wacker13
I am trying to figure out how to program the talkgroups, when I go into that section the screen is greyed out. I know I have the right system key and connect tone. I have the right size code and fleet but it still doesnt work. I have no problem with the type II talkgroups, I dont know why these are so confusing. I only need to add 000-C and 000-D. Anybody with some helpful info let me know.
Posted: Wed Jun 11, 2003 2:41 pm
by wavetar
What radio & CPS package are you working with? MTS? MCS? Astro? What's your Flashcode?
Todd
to Wavetar
Posted: Wed Jun 11, 2003 4:24 pm
by wacker13
Todd-its a brand new Xts3000 model III (astro)
Posted: Wed Jun 11, 2003 4:58 pm
by wavetar
There are no actual "talkgroups" in Type I trunking. That is why the screen is greyed out. It's broken down into FLEETS & SUBFLEETS. You would set your fleet on the same screen as you set your size code. Let's take for example "300-1". Enter 300 as the fleet, you then enter your subfleets in the subfleet screen (for example, subfleets 001 to 00F for an "A" size code). Hope that helps.
Todd
Posted: Thu Jun 12, 2003 9:57 am
by wacker13
Thanks Wavetar that info really helped.----Do you know if block 0 and block 4 would have the same size code and fleet number or would they be different. If different do you know what they are
Posted: Fri Jun 13, 2003 12:56 pm
by N4KVE
I don't think xts3k's can do type 1.That is your problem. 73's to all. GARY N4KVE.
Posted: Sun Jun 15, 2003 6:24 pm
by Twisted_Pear
Receive via IIi mode but in most cases won't transmit unless the controller supports IIi operation. You can catch tails with it though.
-Wayne