Page 1 of 1

Posted: Sun Sep 07, 2003 4:45 pm
by wavetar
It's not a 'bug'. Are you sure you're not pressing the Purple & Orange buttons at the same time? Actually, even 50-100ms between presses would likely result in the same thing. That is one of the correct ways to erase encryption keys. A quote from the XTS3000 Operator's Manual:

KEY Erasure (All KEYS Erased) — Method 2
1. With the radio on, press and hold the Top Side Button; while holding
this button down, press the Emergency Button.
DO NOT press the Emergency Button before pressing the Top
Side Button unless you are in an emergency situation; this would
send an emergency alarm.
2. When all the encryption keys are erased, the
display will show “ERASED.”


Todd

Posted: Sun Sep 07, 2003 6:23 pm
by RocketNJ
Good catch Todd!

George

Posted: Sun Sep 07, 2003 6:58 pm
by The Pager Geek
sombody actually read the user's manual?

Wow... better than me!!!!

tpg

Posted: Mon Sep 08, 2003 1:50 pm
by wavetar
The Pager Geek wrote:sombody actually read the user's manual?

Wow... better than me!!!!

tpg

*grin*. Yeah, it's amazing what you might find in them little things. I must confess, I only knew because I had to find out how to erase the darn things for a customer not too long ago. Still counts though!

Todd