Batboard

Posted: **Mon Nov 17, 2003 5:41 pm**

I am trying to read a new (to me) MT2000,A7 with rss version 6.
I keep getting an error that says "Warning:Communication with radio
failed >Protocol entry error. It is a real Motorola RIB that I use on other radios. Any help ?

Posted: **Mon Nov 17, 2003 6:50 pm**

In order of probability:

PC set for wrong comm port.
Low battery on radio.
RIB to radio cable or connector bad or not seated properly.
PC to RIB cable bad.

Posted: **Mon Nov 17, 2003 7:47 pm**

Does Version 6 for the MT2000 have to be run from pure DOS ?

Posted: **Mon Nov 17, 2003 8:19 pm**

Yes. Also test the communications from the Setup Menu. If the communications test passes, then your cable & RIB are probably ok.

Posted: **Mon Nov 17, 2003 9:29 pm**

Thanks for the help. I was not running it in pure DOS.
Works great now.

Batboard

Help with new MT2000

Help with new MT2000

DOS

Got it, thanks