saber2=mx2000
Posted: Sat Nov 22, 2003 11:40 am
Hi I purchased a mx2000 which is given to be the export model of the saber 2.
Anyone used out of band programming successfully as there are two splits lower stops at 433 and upper split goes down to 440.
Problem I have is my repeaters tx on 431 and rx 439.
Any other software to program these radios as I am told that a saber program will NOT program the MX series.
Brad
Anyone used out of band programming successfully as there are two splits lower stops at 433 and upper split goes down to 440.
Problem I have is my repeaters tx on 431 and rx 439.
Any other software to program these radios as I am told that a saber program will NOT program the MX series.
Brad