Batboard

How does a guy go about changing the contrast on his AS3 display?

Mine is a tad lighter than I'm used to on my Jedi's, and I'd like to darken it up if possible.

Thoughts?

you will have to unscrew the bottom, slide the radio out, and at the bottom of the LCD Screen, at the right, u should see a small hole, u will have to use a small flat head screw driver, and either turn it half clock wise or half way back, but do this, slide it back in, turn on the radio, if it needs to be darker or lighter, just keep turning it, and putting it back in, until you get it right, its a pain in the butt, probally will take 4 trys to get it just right, after that, u should be happy with it.

Thanks! Much better...

It's clockwise to make darker, counterclockwise to lighten.

very cool, just adjusted mine