Page 1 of 1
Posted: Tue Dec 09, 2003 3:56 pm
by 007
AS3:
R07.11.00 / DSP N8.02.08
Posted: Tue Dec 09, 2003 4:04 pm
by tvsjr
AS3:
R07.12.00 / DSP N08.02.08
Posted: Wed Dec 10, 2003 10:10 am
by 515
AS3, UHF, fire breathing, whored out, hack job:
R07.03.00 DSP N08.00.00
AS3, VHF, 512k, factory CAI flash:
R05.60.05 DSP I06.05.02
XTS3000 III UHF factory flash:
R07.05.00 DSP N07.03.19
XTS3000 III 800 factory 9600 P25 trunking flash:
R06.11.15 DSP N08.02.04
Posted: Wed Dec 10, 2003 11:37 am
by wavetar
XTS3000 factory units:
R07.06.01 DSPN07.03.19
R07.14.00 DSPN08.03.01 (brand new unit)
Todd
Posted: Wed Dec 10, 2003 12:03 pm
by ASTROMODAT
The latest IMBE codec firmware for the XTS3000 is included with load R07.13.00/DSPN08.02.08, and up. It sounds noticably better than the prior loads. This load has been out since September, 2003.
For optimum results (re: new IMBE vocoder firmware), you will also need the Sept, 2003 Host/DSP loads on the ASTRO Spectra and DIU3000 so you can enjoy the improved IMBE end-to-end. I will check our ASTRO Spectra and DIU load numbers and post 'em.
DVSI has the particulars on exactly what they have done in terms of uplifting/improving their IMBE vocoder (which you can realize with the latest loads). Their view (from a qualitative standpoint) is that Yes, it sounds noticably better than the older IMBE, but No, it won't knock you off your feet. It's an incremental improvement in IMBE voice quality.
rOf, how about a third column for EMC firmware versions?
Larry